User manual SHARP LC-60LE822ERU

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: SPECIAL NOTE FOR USERS IN THE U. K. The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] Service name Lock CH skip Old LCN E Manual search Add new services within a specified frequency band. After setting the items on the following screen, the TV starts searching. Refer to the table about menu items in the right column on page 14. Frequency Symbol rate QAM modulation MHz Lock CH skip Delete Sort Search start 1 2 Press a/b to select the desired service. Press the colour button on the remote control unit corresponding with the item you want to reconfigure. The mark indicates the operation is set to on. Each time the colour button is pressed, you can switch the corresponding operation on/off. E Manual adjust This function is the same as in "Terrestrial". Refer to "Manual adjust" in "Terrestrial". H You can only reconfigure the "Manual adjust" settings. You can only set the "Lock" setting in "Manual adjust". Buttons for "Manual adjust" operation Lock Press R button. Satellite setting Before selecting the type of search in "Satellite setting", you need to select the satellite broadcast. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. SAT2 [Hot Bird 13E] SAT3 [None] The selected service is deleted. If you want to watch the service you deleted once again, perform "Auto installation", "Additional search", or "Manual search". Sort Press B button. SAT4 [Turksat] E Additional search Use this menu to add new services automatically after auto installation has been completed. Follow steps 1 to 6 in the right column on page 15. The item position of services can be sorted. 1 Press a/b to select the service whose item position you want to move, and then press ;. E Manual search Add new services within a specified frequency band. After setting the items on the following screen, select "Yes" from "Search start" menu. Band Frequency Symbol rate Search start [Vert/Low] Vert/Low Vert/High Horiz/Low Horiz/High 2 Press a/b to move it to the desired position, and then press ;. 3 Repeat steps 1 and 2 until all desired service items are sorted. Cable You can reconfigure the following settings when you select "Cable" in the initial auto installation or the "Auto installation" menu. E Manual adjust This function is the same as in "Digital setting". Refer to "Manual adjust" in "Digital setting". E Additional search Use this menu to add new services automatically after "Digital search" in the "Auto installation" menu has been completed. Press 6 to display the PIN input window. E When selecting "No" Allows you to reset your PIN. NOTE You cannot set both "RC control lock" and "Button control lock" at the same time. Press c/d to select "Yes", and then press ;. E Cancelling the lock Press @ on the TV and set to "Off" to cancel the "RC control lock". Press @ on the remote control unit and set to "Off" to cancel the "Button control lock". Refer to page 7 for menu operation using @- on the front of the TV. NOTE As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. 38 Basic adjustment Language settings View setting View setting Language Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. You can select an OSD language from among 23 languages. Refer to the OSD language column in the specification table for the selectable languages (Page 75). Go to "Menu" > "Setup" > "View setting" > "Language". Go to "Menu" > "Setup" > "View setting" > "Individual setting" > "Digital audio language". E Switching the multi audio languages Each time you press 7 on the remote control unit, the audio language switches. Useful settings View setting View setting Quick start You can reduce the TV's start-up time after turning on the power with the remote control unit. Subtitle Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display if subtitles are available. Go to "Menu" > "Setup" > "View setting" > "Quick start". Item On The TV quickly starts up from standby. 30 W or more of power consumption is required during standby. Power consumption is small during standby. Go to "Menu" > "Setup" > "View setting" > "Individual setting" > "Subtitle". Selectable items E 1st language E 2nd language E For hearing impaired Off E Switching subtitle languages Each time you press [ on the remote control unit, the subtitle switches. Off 1st language 2nd language E Set "For hearing impaired" to "Yes" Subtitles for the hearing impaired have priority over each of the subtitle language settings (e. g. , "1st language", "2nd language", etc. ). EXAMPLE 1st language (For hearing impaired) 1st language NOTE Subtitles will not be displayed when the programme does not contain subtitle information. Subtitles may not be displayed in 3D mode. 39 Useful viewing functions Time shift This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. When the amount of memory used for time shift reaches "Full" and the blue point is around the left edge of the bar (see and in the Counter section on page 41), you cannot operate some functions (F (Pause), S (Reverse), a (Jumping backwards by 10 seconds)). Time shift recording will stop in three hours. Time shift does not work for ATV, external inputs, data broadcasts and radio broadcasts. To release time shift, press READY, change the DTV/SAT channel, change "INPUT" or turn off the power of the TV. [. . . ] Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: e 5 C to e 35 C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems. 74 Appendix Specifications Item LCD panel Resolution Video colour system TV function TV-standard Analogue Digital Receiving channel VHF/UHF CATV Satellite TV-tuning system STEREO/BILINGUAL Audio amplifier Speaker Terminals Antenna RS-232C EXT 1 EXT 2 EXT 3 HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB ETHERNET (10/100) HDMI 2/EXT 3 AUDIO (L/R) DIGITAL AUDIO OUTPUT C. [. . . ]