User manual SHARP LC-705E

[. . . ] LC-32LE700E LC-32LE700S LC-40LE700E LC-40LE700S LC-46LE700E LC-46LE700S LC-52LE700E LC-52LE700S LC-32LX700E LC-40LX700E LC-46LX700E LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S LC-32LX705E LC-40LX705E LC-46LX705E LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO PORTUGUS ESPAOL NEDERLANDS ITALIANO FRANAIS DEUTSCH ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable. Up to three HDMI recording devices, one AV amplifier and two players can be connected using this system. These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device and select the appropriate external source using b. When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by selecting "HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the "INPUT SOURCE" menu. AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE Refer to the operation manual of the device to be connected for further details. After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices' power have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual output. The cables illustrated in the following explanation are commercially available items. 19 AQUOS LINK Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system AQUOS BD player/AQUOS recorder HDMI-certified cable AQUOS LINK setup Basic operation Optical audio cable Selecting channel key This function allows you to select the channel of the connected HDMI device using the TV's remote control unit. Go to "MENU" > "Option" > "AQUOS LINK setup" > select the menu you want to set. AQUOS LINK control Set to "On" to enable HDMI CEC functions. 1 Press a/b to select the input source of the connected HDMI device you want to control using the TV's remote control unit, and then press ;. Press c/d to select "On", and then press ;. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 2 Using genre info This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. NOTE The factory default for this item is "Off". Selecting recorder Here, you can select a recorder for the recording from several connected recorders. NOTE If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source's indication changes (e. g. , from "HDMI 1" to "HDMI 1 (Sub)"). 20 AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Setup menu You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc. ) using the "Setup menu" function. 1 2 Open the remote control unit's flip cover. Press PLAY I to start playback of a title. See the right column, section Top menu/Title list if you want to start playback using the list of the titles of the AQUOS BD player/AQUOS recorder. Press a/b to select "Setup menu", and then press ;. NOTE If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. 3 Press FWD J to fast forward. Press B to turn the HDMI-connected device on/off. Top menu/Title list This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. AQUOS LINK menu "AQUOS LINK menu" allows you to arrange the settings for the sound or external devices, etc. 1 Press a/b to select "Top menu/Title list", and then press ;. The linked recorder now powers on and the TV automatically selects the appropriate external input source. The title list data from the connected AQUOS BD player/ AQUOS recorder displays. E Displaying "AQUOS LINK menu" Open the remote control unit's flip cover, and then press <. 2 Select the title with a/b/c/d, and then press PLAY I. By AQUOS AUDIO SP You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. Media change If your recorder has multiple storage media, select the media type here. Press a/b to select "By AQUOS AUDIO SP", and then press ;. The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. 1 2 Press a/b to select "Media change", and then press ;. Select the desired medium, such as DVD recorder or HDD. The media type changes every time you press ;. By AQUOS SP You can choose to listen to the TV sound only from the AQUOS TV speaker system. Model select If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. Press a/b to select "By AQUOS SP", and then press ;. Sound mode change You can manually change the AQUOS AUDIO speaker system's sound mode. Press a/b to select "Model select", and then press ;. The HDMI device changes every time you press ;. Recorder EPG You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. 1 2 Press a/b to select "Sound mode change". The sound mode changes every time you press ;. Refer to the operation manual of the AQUOS AUDIO speaker system for details. 1 Press a/b to select "Recorder EPG", and then press ;. The external input source switches and the recorder's EPG is displayed. 2 Select the programme to record. Refer to the operation manual of the recorder for details. 21 Menu operation What is the MENU? You need to call up the OSD to perform settings for the TV. The OSD for the settings is called "MENU". The "MENU" enables various settings and adjustments. Basic operation Display the MENU screen Press @ and the "MENU" screen displays. LCFONT embedded Picture Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press ;. [. . . ] This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement. Obtaining source code Some of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include similar requirements. [. . . ]