User manual SHARP LC-70LE740RU

[. . . ] MODEL LC-70LE740E LC-70LE740RU LC-70LE741E LC-70LE741S OPERATION MANUAL LCD COLOUR TELEVISION LC-60LE740E LC-60LE740RU LC-60LE741E LC-60LE741S CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www. sharp. de/doc/ WN8522D_7. pdf. NOTE The wireless LAN USB adapter is designed for indoor use only. ASA Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. [ ENGLISH ] Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dear SHARP customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • You may not be able to change the wide mode while in 3D mode. • Refer to page 52 for PC signal inputs. 40 Useful viewing functions Terminal setting Option Input source settings Option NOTE Audio select When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from the “INPUT” menu Item When connecting devices (including a PC) with a HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with a DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (L/R) jack. Input select For setting the signal type of external equipment. • The label can be six characters or less. • This menu can be changed in the case of the following input sources: − EXT1–3 − HDMI1–4 − PC CH list 1 Press b to select the input source for setting 2 the input signal (“EXT1”) from the “INPUT” menu, and then press ;. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”. Item Y/C, CVBS, RGB INPUT TV Switchable EXT1 HDMI NOTE HDMI + Analogue • If no (colour) image displays, try changing to another signal type. • Check the operation manual of the external equipment for the signal type. Option Selecting the HDMI picture size automatically Option HDMI auto view This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals. 1 Press b to select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”. When selecting “PC” from the “INPUT” menu Item When connecting devices with an AV cable to the PC terminal, displays images without audio. When connecting a PC to the PC terminal, and inputting analogue audio signals from the AUDIO (L/R) jack. Input label You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ;. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Select each character of the new name for the input source with using the software keyboard (Page 13). Video Video+Audio Skipping specified inputs Option Input skip This setting allows you to skip the inputs on the input source selection operation. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”. NOTE • When you select “ATV”, “DTV” or “SAT”, the skip function works only when using the b button on the TV. 41 Useful viewing functions Option NOTE Headphone/Audio out select You can select which device is used for outputting audio. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/ Audio out select”. Headphone Audio out Item Output audio through headphones. Output audio through an A/V receiver or surround audio controller. • This function does not work when “Change audio output device” (Page 30) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”. • Regarding the volume adjustment when “Dual” is set: − Adjust the speaker volume with the i+/- buttons on the remote control unit. − Adjust the headphone volume with the i+/buttons on the TV. − The headphone volume is not muted even by pressing e (Mute) button on the remote control unit. • When not using the headphones: − Audio outputs from the speakers regardless of the settings. Option Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel. [. . . ] Therefore, do not use a wireless LAN adapter other than the supplied SHARP wireless LAN adapter. 73 Appendix Environmental specifications Item I On-mode (W) (in home-mode) J Energy-Save-Mode (W) Advanced K Standby-Mode (W) L Annual Energy Consumption (kWh) Annual Energy Advanced L Consumption EnergySave-Mode (kWh) I J K L Mounting the TV on a wall 70 inch models 135 W 96 W 0. 1 W 197 kWh 140 kWh 60 inch models 100 W 75 W 0. 1 W 146 kWh 110 kWh • This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. [. . . ]