User manual SHARP LC-824E

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: SPECIAL NOTE FOR USERS IN THE U. K. The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] If the device does not operate, turn on the device and select the appropriate external source using b. When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by selecting "HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the "INPUT SOURCE" menu. AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE Refer to the operation manual of the device to be connected for further details. After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices' power have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual output. The cables illustrated in the following explanation are commercially available items. The four buttons (G, I, V, H) connected by a green line are used for time shift operations for the time shift function. AQUOS LINK Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system AQUOS BD player/AQUOS recorder * The ARC (Audio Return Channel) function works only when using the HDMI 1 terminal. HDMI-certified cable AQUOS LINK setup Basic operation Optical audio cable Selecting channel key This function allows you to select the channel of the connected HDMI device using the TV's remote control unit. Go to "Menu" > "Link operation" > "AQUOS LINK setup" > select the menu you want to set. AQUOS LINK control Set to "On" to enable HDMI CEC functions. 1 Press a/b to select the input source of the connected HDMI device you want to control using the TV's remote control unit, and then press ;. Press c/d to select "On", and then press ;. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 2 Using genre info This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. NOTE The factory default for this item is "Off". Selecting recorder Here, you can select a recorder for the recording from several connected recorders. Audio return channel (ARC) If this function is set to "Auto", the TV can send audio data for video content shown on the TV to a connected audio device with just one ARC-compatible cable. Using this function eliminates the need to use a separate digital or analogue audio cable. NOTE If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source's indication changes (e. g. , from "HDMI 1" to "HDMI 1 (Sub)"). Connection for using "Audio return channel" You need to use ARC-compatible cables/devices and connect to the HDMI 1 terminal to activate this function. The connection method is the same as the above Connecting an AQUOS BD player/AQUOS recorder only. AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Setup menu You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc. ) using the "Setup menu" function. Press a/b to select "Setup menu", and then press ;. NOTE 1 2 Press I to start playback of a title. See the section Top menu/title list if you want to start playback using the list of the titles in the AQUOS BD player/AQUOS recorder. If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. Press J to fast forward. Intermediate tone between "Middle" and "Low". Adjusts the white balance by changing the value of each item. NOTE "3D-Y/C" may not operate depending on the input signal type or when the input signal is noisy. "3D-Y/C" has even more effect on composite video signals (CVBS). Monochrome For viewing a video in black & white. Fine motion advanced "Fine motion advanced" technology provides superior solutions for digital display picture quality removing motion blur ("High", "Low", "Off"). Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE This effect is greater on fast moving images. "Fine motion advanced" will have no effect in the following cases. 1) The type of signal received is a PC signal. If images appear blurred, set the "Fine motion advanced" to "Off". NOTE Gamma adjustment Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e 2 to a minimum of f 2. This function is available only when the "OPC" setting is set to "On" or "On:Display". The maximum setting cannot be set to a smaller number than the minimum setting. The minimum setting cannot be set to a bigger number than the maximum setting. The maximum and minimum settings cannot be set to the same number. Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Basic adjustment Audio settings Go to "Menu" > "Setup" > "Audio". Menu CH list :Enter :Back Audio Bass enhancer This function allows you to enjoy bass-enhanced sound. Setup Audio Clear voice Audio STANDARD Auto volume Treble Bass Balance L30 This function emphasises speech against background noise for greater clarity. [Off] Setting audio input Option Audio select R30 Audio Auto volume Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. [. . . ] Storage temperature: e 5 C to e 35 C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems. Appendix Specifications Item LCD COLOUR TV (40 o/102 cm), LC-40LE822E, LC-40LU822E, LC-40LE812E, LC40LX812E 102 cm (40 o) X-Gen panel 1, 920 x 1, 080 x 4 dots PAL/SECAM/NTSC 3. 58/NTSC 4. 43/PAL 60 Analogue Digital Receiving channel VHF/UHF CATV Satellite TV-tuning system STEREO/BILINGUAL Audio amplifier Speaker Terminals Antenna RS-232C EXT 1 EXT 2 EXT 3 HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB ETHERNET (10/100) HDMI 2/EXT 3 AUDIO (L/R) DIGITAL AUDIO OUTPUT C. (Common Interface) OUTPUT/Headphones OSD language CCIR (B/G, I, D/K, L/L') DVB-T (2K/8K OFDM), DVB-C, DVB-S/S2 IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch, I21_I69 ch, IR A_IR J ch Hyper-band, S1_S41 ch 950_2150 MHz*3 Auto Preset 999 ch (non-Nordic [DTV]), Auto Preset 9999 ch (Nordic [DTV]), Auto Preset 99 ch (ATV), Auto Label, Auto Sort, Auto Preset 9999 ch (SAT) NICAM/A2 10 W x 2/15 W x 1 (234 mm x 22 mm) x 2/ 110 mm UHF/VHF 75 q Din type (analogue & digital), Satellite 75 q F type (DVB-S/S2) D-Sub 9 pin male connector SCART (AV input, Y/C input, RGB input, TV output) RCA pin (AV input/AUDIO L/R) 15 pin mini D-sub HDMI (ARC) HDMI HDMI HDMI USB Home network connector (only the 822 model series) 3. 5 mm jack*1 Optical S/PDIF digital audio output EN50221, R206001, CI Plus specification RCA pin (AUDIO R/L)/ 3. 5 mm jack (audio output) Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian AC 220_240 V, 50 Hz 822 models 812 models 822 models 812 models Operating temperature I J K LCD COLOUR TV (46 o/117 cm), LC-46LE822E, LC-46LU822E, LC-46LE812E, LC46LX812E 117 cm (46 o) X-Gen panel LCD COLOUR TV (52 o/132 cm), LC52LE822E LCD panel Resolution Video colour system TV function TV-standard 132 cm (52 o) X-Gen panel Power requirement Power consumption (method IEC62087) Weight 127 W (0. 2 W standby*2) 127 W (0. 2 W standby*2) 19. 5 kg (without stand), 23. 5 kg (with stand) 16. 0 kg (without stand), 19. 5 kg (with stand) 0 C to e 40 C 147 W (0. 2 W standby*2) 147 W (0. 2 W standby*2) 24. 5 kg (without stand), 30. 0 kg (with stand) 20. 5 kg (without stand), 26. 0 kg (with stand) 159 W (0. 2 W standby*2) 30. 0 kg (without stand), 35. 0 kg (with stand) The HDMI 2 and EXT 3 terminals can both use the same audio input terminal. Standby power consumption applies when the TV is set to not receive EPG data. [. . . ]