User manual SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL

[. . . ] 2 USING THE MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ● ABOUT THE MANUALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ● CONVENTIONS USED IN THIS MANUAL . . . . . . . 7 DIFFERENCES BETWEEN MODELS. . . . . . . . . . . . . . . 8 1 BEFORE USING THE MACHINE 2 ● ● ● ● ● ● COPY FUNCTIONS PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 9 ● OPERATION PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When you have finished entering the fax number, press the [OK] key. 4 Repeat step 3 for all of the destinations that you wish to store in the group dial. Up to 100 destinations can be stored in a group dial. 105 FAX FUNCTIONS ● Editing and deleting auto-dial numbers To edit or delete an auto-dial number, follow steps 1 through 6 on p. 103 and then follow the steps below. The Speed Dial number is being used in a transmission in progress or in a stored transmission, a Speed Dial number cannot be edited or cleared. Note ● Editing a Rapid key or Speed Dial number 1 2 Select "Speed" and Select "Change" with the [ ] or [ ] key. Press or the [SPEED] key ( numeric keys. ) and edit the destination fax number with the • Press the [SPEED] key ( ) and then enter the Speed Dial number (000 to 299) that you wish to edit with the numeric keys. • Move the cursor to the digit(s) that you wish to edit with the [ ] or [ ] key, and then enter the correct digit(s) with the numeric keys. • To delete a digit, move the cursor to the digit that you wish to delete with the [ ] or [ ] key and then press the [C] key. 3 To finish the storing procedure, press the [BLACK & WHITE START] key. If you wish to program an option such as F-code, chain dialling, transmission speed, or international transmission mode, press the [OK] key. ● Deleting a Speed Dial number 1 2 Select "Delete" and press the [SPEED] key ( Press the [SPEED] key ( with the numeric keys. ). ) and then enter the Speed Dial number (000 to 299) that you wish to delete Select "Delete" with the [ ] or [ ] key. Note If you select "No Delete", you can press the ( ) key to check the destination name. If you are deleting the destination, check the destination name and then delete the destination. ● Editing and deleting group dials To edit or delete a group dial, follow steps 1 through 3 on pages "STORING, EDITING, AND DELETING AUTO-DIAL NUMBERS (SPEED DIAL NUMBERS, AND GROUP DIALS)" (p. 103) and then follow the steps below. Note A group dial cannot be edited or deleted in the following cases. • The group dial is stored in a program ● Editing a group dial 1 2 3 1 2 Select "Group" and press the [OK] key. Press the group dial number (one of Rapid keys [01] to [50]) that you wish to edit, and edit the group name, the search characters When you have finished editing the destinations, press the [BLACK & WHITE START] key. ● Deleting a group dial Select "Delete" with the [ ] or [ ] key and press the group that you wish to edit. Select "Delete" with the [ ] or [ ] key. Note If you select "No Delete", you can press the ( ) key to check the destination name. • Program List: Shows the operations stored in each program. • Timer List: Shows timer transmissions and recall transmissions. Polling List: Shows the documents stored for memory polling. For other lists that can be printed, refer to "List Print" (p. 181). 1 2 3 Press the [SPECIAL FUNCTION] key ( ). Select "Data List Print" and select "Fax" with the [ ] or [ ] key. Select the list that you wish to print with the [ ] or [ ] key. See the explanation of the lists that can be printed above. INCLUDING SENDER INFORMATION ON FAXES (OWN NUMBER SENDING) This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page number at the top centre of each page that you fax. All pages that you fax include this information. Example of fax page printed out by the receiving machine 1-AP-2015-WED 15:00 SHARP PLANNING DIV. 001/001 (1) (1) (2) (3) (4) Date and time: Sender's name: Sender' number: Transmitted page number: (2) (3) (4) programmed in the system settings (see "Daylight Saving Time" (p. 176)). programmed in the system settings (see "Own Passcode Set" (p. 184)). programmed in the system settings (see "Own Passcode Set" (p. 184)). 3-digit number appearing in the format, "page number/total pages". (Only the page number appears if you use manual transmission, direct transmission, or quick on-line transmission. ) Position of sender information You can select whether the sender information is added outside the document data or inside the document data in the system settings (see "Print Station # In Rcvd Data" (p. 186)). [. . . ] • PCL is a registered trademark of the Hewlett-Packard Company. • IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. • Sharpdesk is a trademark of Sharp Corporation. • All other trademarks and copyrights are the property of their respective owners. Candid and Taffy are trademarks of Monotype Imaging, Inc. [. . . ]