User manual SHARP LL-172A/172G

[. . . ] IMPORTANT: To aid in reporting in case of loss or theft, please record the monitor's model and serial numbers in the space provided. WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment. [. . . ] notes: - In most cases automatic adjustment is sufficient. - It may not be possible to achieve correct adjustment with the first automatic adjustment. in such a case , try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments (p. 22) can be performed after the automatic adjustment. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright. ) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. After completing the adjustments, press the computer's [Esc] key to exit the Adjustment Program. Note: - If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. Display an image that makes the entire screen light. Notes: - When the LL-172G is used with a digital connection, ADJUSTMENT and GAIN CONTROL Menu adjustments are not necessary. - The OSD Menu automatically disappears approximately 30 seconds after the last command. - This chapter provides the procedure how to adjust the screen by using Adjustment Pattern (for Windows). When the LL-172G is used with a digital connection, this menu adjustment is not necessary. AUTO When [AUTO] is selected with the button, the [CLOCK], [PHASE], [H-POS] and [V-POS] settings are automatically adjusted. CLOCK The figure below demonstrates how to adjust so that vertical flicker noise is not emitted. Vertical flicker noise PHASE The figure below demonstrates how to adjust so that horizontal flicker noise is not emitted. ( buttons) Note: - Adjustments to [PHASE] should be made only after [CLOCK] has been correctly set. Horizontal flicker noise H-POS (horizontal positioning) and V-POS (vertical positioning) To center the Adjustment Pattern within the boundaries of the screen, adjust the left-right (HPOS) values and the up-down (V-POS) values. When the LL-172G is used with a digital connection, this menu adjustment is not necessary. AUTO When [AUTO] is selected with the button, the [BLACK LEVEL] and [CONTRAST] settings are automatically adjusted. [. . . ] Aktivieren Sie [Display a list of the known drivers for this device so that I can choose a specific driver], und klicken Sie auf [Next]. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Klicken Sie auf [General], und wählen Sie unter [Compatibility] die Option [Apply the new display setting without restarting]. [. . . ]