User manual SHARP LL-T15G1/E15G1

[. . . ] 11 Connecting the monitor and turning the monitor on and off . WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Check that the monitor details are displayed, then click [Apply]. When [Hardware Update Wizard] appears, check [Install from a list or specific location [Advanced]] and click [Next]. (If the set-up information has already been installed, so too has the profile, and there is no need to install it. From [Settings], choose [Control Panel]. Click on [General] and from [Compatibility] select [Apply the new display setting without restarting], then click on [Color Management]. Choose the color profile that you would like to install, and click on [Add]. Connecting the monitor and turning the monitor on and off Connecting the monitor and turning the monitor on and off information about the ColorSync profile (for MacOS) About the ColorSync profile ColorSync is the Apple Corporation's color management system and is a function that enables color resolution to be realized when used with a compatible application. In addition, it is necessary to have PC Exchange or File Exchange installed in your system. - Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this. Copy the profile to be used from the Mac folder on the Utility Disk to the ColorSync profile folder located within the system folder. Using the ColorSync on the control panel, choose the profile to be used. 19) Fine adjustments can be made using the On Screen Display (OSD) Menu. Note: - All adjustments will be saved even after turning the power off. Setting the lock) any attempted changes to adjusted values will be voided. While pressing the MENU button, press the power button (i. continue to press the button until the message appears on the screen. When the menu is unlocked: [ADJUSTMENT LOCKED] will appear on the screen, and the lock will be set. When the menu is locked: [ADJUSTMENT UNLOCKED] will appear on the screen, and the lock will be removed. Note: - When the lock is in place, all buttons other than the power button are disabled. Resetting all adjustment values All adjustment values can be returned to their original ex-factory values in one command. Press the MENU button and the SELECT button simultaneously, and while doing this press the power button (i. [. . . ] Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Klicken Sie auf [General], und wählen Sie unter [Compatibility] die Option [Apply the new display setting without restarting]. This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Cocher la case [Display a list of all the drivers in a specific location, so you can select the driver you want. [. . . ]