User manual SHARP LL-172AW OPERATION MANUAL

[. . . ] LCD Monitor LCD Farbmonitor Moniteur LCD Monitor LCD Monitor LCD LL-172A LL-172G OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE D'USO MANUAL DE FUNCIONAMIENTO LL-172A Table of Contents/Inhaltsverzeichnis/Table des matières/Indice/Índice Notice for Users in the USA . 121 Notice for Users in the USA IMPORTANT: To aid in reporting in case of loss or theft, please record the monitor's model and serial numbers in the space provided. The numbers are located on the rear of the monitor. Model No. : Serial No. : FCC Statement WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment. Declaration of Conformity SHARP LCD Color Monitor LL-172A-W/LL-172A-B/LL-172G-W/LL-172G-B This device complies with part 15 of the FCC rules. [. . . ] (Example: Displayed screen of the LL-172G) Screen display for adjustment First display an image that makes the entire screen light. If you are using Windows, you can use the Adjustment Pattern on the accompanying CDROM. Opening the Adjustment Pattern (for Windows) This explanation is for Windows 95/98/2000/Me/ XP, and assumes that the CD-ROM drive is "D" drive. Load the accessory CD-ROM into the CD-ROM drive of the computer. If using Windows 3. 1, open [File Manager] and choose "D" drive. Double click on [Adj_uty. exe] to run the Adjustment Program. The screen will become dark and [ADJUSTING] will be displayed. After a few seconds the ADJUSTMENT Menu will return. (The automatic adjustment is now complete. ) 3. Press the MENU button 5 times to make the OSD (On Screen Display) Menu disappear. Notes: - In most cases automatic adjustment is sufficient. - It may not be possible to achieve correct adjustment with the first automatic adjustment. In such a case, try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments (p. 22) can be performed after the automatic adjustment. - When further fine adjustment is needed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright. ) - When the computer's video input signals are Composite Sync or Sync on Green. (Automatic adjustments may not be possible. ) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. After completing the adjustments, press the computer's [Esc] key to exit the Adjustment Program. Note: - If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. (This is due to the specification of the input signal and is not a malfunction. ) 21 Adjusting the screen display Manual screen adjustment 1. Display an image that makes the entire screen light. Display the OSD Menu by pressing the MENU button. [. . . ] - Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this. Load the accessory CD-ROM into the CD-ROM drive of the computer. Copy the profile to be used from the CD-ROM to the ColorSync profile folder in the system folder. [. . . ]