User manual SHARP LL-191A OPERATION MANUAL

[. . . ] LCD Monitor LCD Farbmonitor Moniteur LCD Monitor LCD Monitor LCD LL-191A OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE D'USO MANUAL DE FUNCIONAMIENTO Table of Contents/Inhaltsverzeichnis/Table des matières/Indice/Índice/ Notice for Users in the USA . 119 Notice for Users in the USA IMPORTANT: To aid in reporting in case of loss or theft, please record the monitor's model and serial numbers in the space provided. The numbers are located on the rear of the monitor. Model No. : Serial No. : FCC Statement WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment. Declaration of Conformity SHARP LCD Color Monitor LL-191A-W/LL-191A-B This device complies with part 15 of the FCC rules. [. . . ] After a few seconds the ADJUSTMENT Menu will return. (The automatic adjustment is now complete. ) 3. Press the MENU button 5 times to make the OSD (On Screen Display) Menu disappear. Notes: - In most cases automatic adjustment is sufficient. - It may not be possible to achieve correct adjustment with the first automatic adjustment. In such a case, try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments (p. 19) can be performed after the automatic adjustment. - When further fine adjustment is needed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright. ) - When the computer's video input signals are Composite Sync or Sync on Green. (Automatic adjustments may not be possible. ) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. After completing the adjustments, press the computer's [Esc] key to exit the Adjustment Program. Note: - If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. (This is due to the specification of the input signal and is not a malfunction. ) 18 Adjusting the screen display English Manual screen adjustment 1. Display an image that makes the entire screen light. Display the OSD Menu by pressing the MENU button. ADJUSTMENT Menu Select the option by pressing the / MODE button. MENU GAIN CONTROL Menu ADJUSTMENT Menu AUTO When [AUTO] is selected with the button, the [CLOCK], [PHASE], [H-POS] and [V-POS] settings are automatically adjusted. CLOCK The figure below demonstrates how to adjust so that vertical flicker noise is not emitted. ( buttons) Select the option by pressing the / MODE button. Vertical flicker noise PHASE The figure below demonstrates how to adjust so that horizontal flicker noise is not emitted. ( buttons) Note: - Adjustments to [PHASE] should be made only after [CLOCK] has been correctly set. MENU COLOR CONTROL Menu Select the option by pressing the / MODE button. MENU MODE SELECT-1 Menu Select the option by pressing the / MODE button. MENU MODE SELECT-2 Menu Horizontal flicker noise H-POS (horizontal positioning) and V-POS (vertical positioning) To center the Adjustment Pattern within the boundaries of the screen, adjust the left-right (HPOS) values and the up-down (V-POS) values. [. . . ] Choose the color profile that you would like to install, and click on [Add]. Choose the profile and click on [Set As Default]. - When using the ICC profile, set as follows: - [DISPLAY MODE]: [STD] or [OFFICE] - [WHITE BALANCE]: [STD] - [GAMMA]: [0] 28 Information about the ColorSync profile (For MacOS) About the ColorSync profile ColorSync is Apple Computer's color management system and enables color reproduction characteristics to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor. [. . . ]