User manual SHARP LL-T15A3

[. . . ] LCD Monitor !"==== ! LL-T15A3 OPERATION MANUAL !" Table of Contents Tips and safety precautions . 5 Connecting the monitor and turning the monitor on and off . 7 Connecting the monitor to a computer . 7 Connecting the monitor to a power source . [. . . ] Check [Display a list of all the drivers in a specific location, so you can select the driver you want. ] and click [Next]. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:], and click [OK]. Select the monitor details, then click [Next], [Next], and [Finish]. Check that the monitor details are displayed, then click [Apply]. Remove the Utility Disk from the A drive. Français Deutsch English If the "Add New Hardware Wizard" has not appeared: Connecting the monitor and turning the monitor on and off Installing the ICC profile Installing the monitor's ICC profile. (If the set-up information has already been installed, so too has the profile, and there is no need to install it. ) This explanation assumes that the floppy disk drive is "A drive". Place the Utility Disk in the computer's A drive. From [Settings], choose [Control Panel]. Click on [General] and from [Compatibility] select [Apply the new display setting without restarting], then click on [Color Management]. Click [Add], and select [3 ½ Floppy [A:]] as the file location. Choose the color profile that you would like to install, and click on [Add]. Choose the profile and click on [Set As Default]. Remove the Utility Disk from the A drive. - When using an ICC profile, set [WHITE BALANCE] to [STD] . Information about the ColorSync profile (for MacOS) About the ColorSync profile ColorSync is the Apple Corporation's color management system and is a function that enables color resolution to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor. Notes: - This monitor's ColorSync profile works with MacOS8. 5 or above. - When using the ColorSync profile, set [WHITE BALANCE] to [STD]. Setting up the ColorSync profile Notes: - A floppy disk drive is necessary. In addition, it is necessary to have PC Exchange or File Exchange installed in your system. - Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this. 1. Place the Utility Disk (provided) into the computer's floppy disk drive. 2. Copy the profile to be used from the Mac folder on the Utility Disk to the ColorSync profile folder located within the system folder. [. . . ] - All are compliant only with non-interlaced. - Frequencies for Power Macintosh are reference values. To connect, another adapter (commercially available) may be required. - If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. [. . . ]