User manual SHARP MD-DR470

[. . . ] MD-DR470H ENGLISH Introduction Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. ENGLISH Important Introduction Contents -Introduction/Contents!Useful Features Page Special Notes . [. . . ] " To cancel the operation, press the button. 10When Press the MENU button. The unit enters the menu select mode. a sound, such as person speaking, is picked up by the microphone, recording will begin automatically. Select "REC MODE" by pressing the button and press the MENU button. or Select the recording mode (step 3, page 32) and press the MENU button. Notes: " Synchronised recording cannot be set with traceback recording. " If the unit starts recording from low unwanted noises too often, set the microphone input to "MIC SYNC L (Low)". E-38 02/12/18 MDDR470_SEEG_E. fm -Recording from a Microphone- Useful Features Select the recording start level by pressing the or button and press the MENU button. MD-DR470H Recording from a Microphone (continued) !Track intervals When recording from a microphone, track numbers will be created automatically at regular intervals. Example: Set to "5 minutes". ENGLISH During mic manual recording Timed auto marks will be created every 5 minutes. 1 -Recording from a Microphone- Whilst the recording or recording is paused, press the MENU button. Select "MARK" by pressing the or button and press the MENU button. Select the desired interval by pressing the or button and press the MENU button. OFF TIME 10min TIME 5min TIME 3min No track numbers are created automatically. A new track number is created every 10 minutes. A new track number is created every 5 minutes. A new track number is created every 3 minutes. 2 3 Useful Features During mic synchro recording If a silence lasts for 3 seconds or more, a timed auto mark will be created 5 minutes after the previous mark is created. Creating track numbers manually Press the REC button whilst recording. You can perform the same operation by pressing the BASS button on the remote control unit. For limitations on numbering tracks, see page 34 as well. E-39 02/12/18 MDDR470_SEEG_E. fm Checking Displays !Switching displays during playback or whilst in the pause mode Switching the display for the remote control and the unit can be done separately. Each time the button is pressed, the display will change as follows. [On the remote control] Press the DISPLAY button. Track number Track name Playing time Remaining time of the current track Disc name Total remaining playback time MD-DR470H ENGLISH E [On the main unit] Press the DISP button. A B C D D E F E-40 02/12/18 MDDR470_SEEG_E. fm -Checking Displays- A B C Notes: " If the disc name or the track name was not originally recorded on the MiniDisc, "NO NAME" will be displayed. " Remaining recording time varies depending on the set recording mode. " Elapsed playback time and remaining playback time may be different from the actual time. Useful Features MD-DR470H Checking Displays (continued) !Switching displays whilst in the stop mode Switching the display for the remote control and the unit can be done separately. Each time the button is pressed, the display will change as follows. The display varies according to the play mode (group, favourite track). Normal playback mode Lights up Total number of tracks Group playback mode "G" Lights up (main unit) * Total number of tracks in the group Favourite track playback mode "D" Lights up (main unit) Total number of favourite tracks registered * ENGLISH Checking all tracks [On the remote control] Press the DISPLAY button. Useful Features -Checking Displays- A B C D Total playing time Disc name Remaining recording time Total playing Total playing time of the group time of favourite tracks * Group name * Remaining recording time Disc name Remaining recording time [On the main unit] Press the DISP button. When group playback and favourite track playback are set simultaneously, (*) will appear. A BD C E Notes: " Remaining recording time varies depending on the set recording mode. " Remaining recording time will not be displayed with a playback only MiniDisc. E-41 02/12/18 MDDR470_SEEG_E. fm MD-DR470H Checking track by track [On the remote control] 1 Select a track by pressing the 2 Press the DISPLAY button. Checking the remaining amount of battery level The remaining amount of battery level is shown by the battery indicator ( ) during operation. ENGLISH A B C or D D Disappears Track number Playing time Track name Lights up B E C To check all tracks, press the button. " When the battery is completely discharged, the battery indicator will flash. Recharge the battery or replace the alkaline battery with a new one. [. . . ] Protect " There is no space left for recording character information (track names, disc names, etc. ). (Turn off the power, and wait for a while. ) NO TRACK (NoTRACK) PLAY MD (PLAYmd) POWER?PROTECTED SORRY (Sorry) ?DISC " A disc which contains data other than music was played. (A disc which contains nonmusic data cannot be played. ) " The group recording or the GROUP RESERVE function cannot be performed. [. . . ]