User manual SHARP MD-MS701

[. . . ] The AC adaptor may be different from the one in the drawing. Optional Accessories Battery case (AD-M18BC) Car adaptor (AD-CA20X) Cassette adaptor (AD-CT14) Connection cable (for digital recording) (AD-M1DC) Connection cable (for digital recording) (AD-M2DC) 2 01/10/26 MD-MS701_1. fm Contents Page MD-MS701 Important Introduction Page Useful Features Special Notes . . 7 Power Source Using with the Rechargeable Battery . . 10 Advanced Features Preparation Inserting a MiniDisc . . 12 References Basic Operation Recording . [. . . ] Press the button. Recording will start. Note: To keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See "Editing a Recorded MiniDisc", page 34. ) 23 01/10/26 MD-MS701_4. fm -Advanced Recording- 3 Press the ENTER/SYNC button. Useful Features To cancel the operation, press the :OFF/HOLD button. MD-MS701 Advanced Recording (continued) To create your own track numbers Recording tracks as a single track You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. The track number will be increased by one. One track number will be added every time the REC button is pressed. You can record several pieces of music as a single track by disabling the auto marker function. When a recording is paused or whilst recording. . . 1 2 3 Useful Features -Advanced Recording- Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. In that case, wait until the next operation can be resumed. In stereo recording In 2 times long recording In 4 times long recording In monaural recording Within 40 seconds Within 80 seconds Within 160 seconds Within 80 seconds Press the MENU/CHRG button repeatedly to select "MARK". Press the MENU/CHRG button to select "MARK OFF". Notes: When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. Complete the operation within 7 seconds whilst selecting the menus. 24 01/10/26 MD-MS701_4. fm MD-MS701 About track numbers 1. Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). Press the MENU/CHRG button to switch items. Press the ENTER/SYNC button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. Auto power save When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster. ) MENU BEEP (Confirmation sound) SETTING ITEM BEEP ON* BEEP OFF Beep Silent Set. Cancelled. What is auto power save function? During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted. If this unit is used with the AC adaptor, the storage time will be 40 seconds regardless of the settings. The storage time varies depending on the recording mode. AUTO PLAY (Auto play) A-PLAY ON* A-PLAY OFF POWER SAVE (Auto power save) D-LEVEL (Digital recording level) AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 Digital recording level (*) indicates default setting. "D. L MODE 1" The digital recording level you set will be kept even after cancelling recording. "D. L MODE 2" Every time you cancel recording, the level will return to [D. L 0dB]. 28 01/10/26 MD-MS701_5. fm Titling a MiniDisc 1 2 3 Creating disc and track names Load a MiniDisc to be named. A playback only or recording prevented MiniDisc cannot be edited. <Disc name> <Track name> Whilst in the stop Whilst in the pause mode, press the mode, press the MENU/CHRG button to MENU/CHRG button to select "EDIT". [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Power source: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1 AC adaptor (AC 230 V, 50/60 Hz) Separately available battery case, AD-M18BC (Commercially available, "AA" size (LR6), alkaline battery x 1) DC 4. 5 V: Optional car adaptor, AD-CA20X (for cars with a 12-24 V DC negative earth electrical system) 7 W (AC adaptor) RMS: 20 mW (10 mW + 10 mW) (0. 2 % T. H. D. ) Approx. 5. 5 hours (fully charged)(When using the AC adaptor included with the unit) Width: 76 mm (3") Height: 22. 9 mm (29/32") Depth: 83 mm (3-9/32") 148 g (0. 33 lbs. ) with rechargeable battery Line/optical digital Earphones (impedance: 32 ohms) Portable MiniDisc recorder Non-contact, 3-beam semiconductor laser pickup Stereo 2 channels/monaural 1 channel 20 - 20, 000 Hz ( 3 dB) Approx. [. . . ]