User manual SHARP MD-MT888H

[. . . ] PORTABLE MINIDISC RECORDER MODEL Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. MD-MT888H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 MT888H_UK_F 1 01. 8. 30, 1:57 PM MD-MT888H -Accessories- Accessories Important Introduction Remote control x 1 Earphones x 1 AC adaptor (RADPA8046AWZZ) x1 Battery carrying case x 1 Rechargeable nickel-metal hydride battery (AD-N55BT) x1 Battery charger x 1 Connection cable (for analogue recording) x 1 Connection cable (for digital recording) x 1 Carrying bag x 1 Battery case x 1 Notes: z Parts and equipment mentioned in this operation manual other than those detailed above are not included. [. . . ] z To cancel the operation, move the M button toward . Example: Set to "5 minutes". During a mic manual recording Timed auto marks will be created every 5 minutes. The unit enters the menu select mode. 2 3 Move the M button toward or to select "T(TIME MARK)" and press it. Move the M button toward or to select the desired interval and press it. O(OFF): No track numbers are created automatically. 1(10min): A new track number is created every 10 minutes. 5(5min): A new track number is created every 5 minutes. 3(3min): A new track number is created every 3 minutes. During a mic synchro recording If a silence lasts for 3 seconds or more, a timed auto mark will be created 5 minutes after the previous mark is created. 4 Track numbers will be created automatically at regular intervals. Creating track numbers manually Press the REC button whilst recording. z Complete the operation within 25 seconds whilst selecting the menus. 01/8/30 4. fm Useful Features 1 Whilst the recording or recording is paused, press the M button. 37 -Recording from a Microphone- Changing intervals between tracks MD-MT888H Checking Displays , , To check the remaining recording time and the total playing time Whilst in the stop mode, hold down the DISP button for 1 second or more. Each time the button is pressed, the display will change as follows. , , To display the playing time of an individual track 1 Whilst in the stop mode, move the M button toward or to select a track number or name. Useful Features -Checking Displays- 2 Hold down the DISP button for 1 second or more. Disc name when "GROUP" is off Group name when "GROUP" is on Total playing time when "GROUP" is off Total playing time of the selected group when "GROUP" is on Remaining recording time Once displaying the playing time, just select the desired track number to display its playing time. Track number Track name Playing time In the group mode, track numbers in the group are displayed. z Remaining recording time varies depending on the set recording mode. z Remaining recording time will not be displayed with a playback only MiniDisc. 38 01/8/30 4. fm MD-MT888H , , To check the elapsed time and remaining time of the track Whilst the playback or the playback is paused, hold down the DISP button for 1 second or more. Each time the button is pressed, the display will change as follows. , , Checking the remaining amount of battery level The remaining amount of battery level is shown by the battery indicator ( ) during operation. Useful Features z When the battery is completely discharged, the battery indicator will flash. Recharge the battery or replace the alkaline battery with a new one. z When the battery has run out completely, "LoBATT" will appear. Then, the power will be disconnected automatically. Track name Remaining playback time Elapsed playback time Notes: z If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. z The battery indicator will not correctly display the remaining capacity for approximately 20 seconds after the power has been turned on. z When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. z The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. This is normal. Notes: z If the disc name or the track name was not originally recorded on the MiniDisc, "NoNAME" will be displayed. z Elapsed playback time and remaining playback time may be different from the actual time. 39 01/8/30 4. fm -Checking Displays- MD-MT888H Titling a MiniDisc z Load a MiniDisc to be named. A playback only or recording prevented MiniDisc cannot be edited. z The group-recorded MD may not be edited properly with other equipment. The group-recorded MD contains the menus that cannot be edited if the group mode has been cancelled. Select the group mode before editing. 4 Move the M button toward to select the type of characters. Advanced Features -Titling a MiniDisc- , , Creating a disc name Whilst in the stop mode, check that " TOTAL" is displayed on the LCD. [. . . ] peak) DC 5 V: DC 1. 5 V: DC 1. 2 V: DC 1. 5 V: References Power consumption: Output power: -Specifications- Charging time: Dimensions: Weight: Input socket: Output socket: Type: Signal readout: Audio channels: Frequency response: Rotation speed: Error correction: Coding: Recording method: Sampling frequency: Wow and flutter: 62 01/8/30 6. fm MD-MT888H Battery life: Stereo When using the rechargeable battery (fully charged) included with the unit When using one, commercially available, high capacity, "AA" size (LR6), alkaline battery (The rechargeable battery is in the unit, discharged. ) When using one, commercially available, high capacity, "AA" size (LR6), alkaline battery with the rechargeable battery (fully charged) Input sensitivity: Reference input level MIC H MIC L LINE z z z z 0. 25 mV 2. 5 mV 100 mV Input impedance 10 k ohms 10 k ohms 20 k ohms LINE 250 mV (-12 dB) Earphones Continuous recording: Approx. 20 hours 2 times long Continuous recording: Approx. 27. 5 hours Output level: Specified output Maximum output level 5 mW + 5 mW Load impedance 32 ohms 10 k ohms Continuous play: Approx. 25 hours 4 times long Continuous recording: Approx. [. . . ]