User manual SHARP MD-MT90C

[. . . ] Thank you for purchasing this SHARP product. for the best performance , read this manual carefully. It will guide you in operating your SHARP product. Z US and foreign patents licensed from Dolby Laboratories. [. . . ] Z This unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit. The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. Auto power save function automatically adjusts the sound skip memory storage to be from 5 to 10 seconds depending on playback conditions, this saves battery power. If the MiniDisc unit is used in areas of much vibration, it may be necessary to fix the sound skip memory to 10 seconds "Psave OFF". This will improve performance under difficult conditions but uses more power. (When the AC/car adaptor is used the 10 second mode is always used. The digital recording level you set will be kept even after cancelling recording. Every time you cancel recording, the level will return to [D. A playback only or recording prevented MiniDisc cannot be edited. The first 3 characters in the group of the selected characters will be displayed for about 1 second. Z The unit will enter the character input mode. To enter more letters, repeat steps 3 - 5. When the name has been completely entered, press the EDIT button. "TOC" will not disappear until the recorded contents have been updated. [. . . ] There may be some deviations from these values in individual units. 2V: Rechargeable Nickel-Metal Hydride battery (AD-N70BT) x 1 AC adaptor (AC 120V, 60 Hz) Commercially available, "AA" size (LR6), alkaline battery x 1 Optional car adaptor, AD-CA20X (for cars with a 12-24V DC negative earth electrical system) 7 W (AC adaptor) RMS; 20 mW (10 mW + 10 mW) (0. 5 hours (fully charged) (When using the AC adaptor included with the unit) Battery life: When using the recharge- When using a commercialable battery (fully charged) ly available, high capacity, included with the unit "AA" size (LR6), alkaline battery Continuous recording: Approx. Z The continuous recording time is for analogue inputs when the volume level is set to "VOL 0". [. . . ]