User manual SHARP MD-MT99C

[. . . ] Thank you for purchasing this SHARP product. for the best performance , read this manual carefully. It will guide you in operating your SHARP product. Z US and foreign patents licensed from Dolby Laboratories. [. . . ] It may cause heat generation, fire, or explosion. Z Do not dip the battery in water, do not dispose of it in a fire, and do not take it apart. Z If the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a dry cloth. Use a commercially available LR6, "AA" size alkaline battery. Notes: z Setting the volume level to "0" whilst recording with the rechargeable or an alkaline battery reduces the battery drain. Z When you do not use the unit for hours, remove the battery. (The battery drains gradually even when the power is turned off. ) z Carry the battery in the supplied case. Z This unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit. The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted. [. . . ] 5 V: Rechargeable Nickel-Metal Hydride battery (AD-N70BT) x 1 AC adaptor (AC 120 V, 60 Hz) Commercially available, "AA" size (LR6), alkaline battery x 1 Optional car adaptor, AD-CA20X (for cars with a 12-24 V DC negative earth electrical system) 5 hours (fully charged)(When using the AC adaptor included with the unit) Width: 81. Battery life: Stereo When using the rechargeable battery (fully charged) included with the unit When using a commercially available, high capacity, "AA" size (LR6), alkaline battery Input sensitivity: Recording level MIC H MIC L LINE Output level: Specified output Headphones LINE 250 mV (-12 dB) Maximum output level 10 mW + 10 mW Load impedance 16 ohms 10 k ohms Reference input level 0. 15 hours 2 times long Continuous recording: Approx. 5 hours 4 times long Continuous recording: Approx. [. . . ]