User manual SHARP MD-MX30H

[. . . ] No objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: At full power prolonged listening to a personal stereo may damage the user's hearing. The model is in compliance with the law in case of using it with the SHARP earphones (model number RPHOH0011AWZZ). Order proper earphones if it comes in to damage. [. . . ] By employing this system, 2 times and 4 times long recordings are enabled in stereo mode. Special compressing method allows the 4 times long recording to realise long-time stereo recording. Therefore, some noise is recorded occasionally. If sound quality should be emphasised, stereo recording or 2 times long recording is recommended. Recording automatically starts or pauses by detecting sound from the stereo system (Synchronised recording). Select the starting point for your recording and press the PAUSE button. The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed. To interrupt recording When the stereo system is stopped, the unit will enter the synchro recording pause mode. when playback is resumed , the recording will be resumed. If a silence lasts for 3 seconds or more, the recording will be paused (pause function does not work for approximately 10 seconds after a recording starts). When the unit receives sound again, recording automatically starts. When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. Beep sound Auto play With a MiniDisc inserted, press the MENU/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted. If this unit is used with the AC adaptor, the storage time will be 40 seconds regardless of the settings. L MODE 1" The digital recording level you set will be kept even after cancelling recording. L MODE 2" Every time you cancel recording, the level will return to [D. [. . . ] When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. Unplug the AC adaptor from the wall socket. Leave the unit completely unpowered for approximately 30 seconds. Plug the AC adaptor back into the wall socket and reoperate the unit. [. . . ]