User manual SHARP MD-M2H OPERATION MANUAL

[. . . ] MD MICRO SYSTEM OPERATION MANUAL MODEL MD-M2H Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MD-M2H MD micro system consisting of MD-M2H (main unit) and CP-M2H (speaker system). CONTENTS Page SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The EON stand-by mode will be cancelled. ("PTY" will go out. ) q "PTY TI" and "SELECT" will appear alternately for about 6 seconds. About the PTYI (Dynamic PTY Indicator): PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is being received. Dynamic PTY indicates that the PTY for the station tuned in, or the PTY referenced in the EON data, is assessed whenever the programme changes and may be changed. PTYI Meaning Tuned into a dynamic PTY station. Goes out Note: q When "PTYI" appears, if you press the DISPLAY MODE button to display the programme type, you can check the type of programme you are actually receiving. 3 Whilst they are being displayed, select the desired programme type pressing the PRESET (X or W) button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP q The selected programme type will flash. 4 Within 4 seconds, press the PTY. TI SEARCH button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP q The selected programme type and "WAITING" will be displayed for 2 seconds each. q "PTY" will appear, and the unit will enter the EONPTY stand-by mode. 25 (Continued) s EON-TI (Main unit operation) 5 When a TA specified starts on a other network station, the unit will automatically switch to that station, and "TI" will flash. 4 2 3 6 When the traffic announcement is over, the unit will automatically return to the original station you were tuned to. Note: q If the EON button is pressed when "EON" is not displayed, "NO EON" will appear for 5 seconds to indicate that the unit cannot enter the EON stand-by mode. 1 Tune in the desired RDS station (when a station name is being displayed). Checking the stand-by mode setting: When in the EON stand-by mode, press the EON button. ("TI" "WAITING") 2 Press the EON button when "EON" appears. To cancel the EON stand-by mode: When in the EON stand-by mode, press the EON button. The EON stand-by mode will be cancelled. Note: q If neither "TP" nor "TA" appear, then even if "EON" appears the unit cannot enter the EON-TI standby mode. TI) button is pressed after TI is selected, "NO TI" will flash for 4 seconds. q "PTY TI" and "SELECT" will appear alternately for about 6 seconds. 3 Whilst they are being displayed, select the TI (Traffic Information) pressing the PRESET (X or W) button. 4 Within 4 seconds, press the PTY. TI SEARCH button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP q "TI" and "WAITING" will appear for 2 seconds each. q "TI" will appear, and the unit will enter the EONTI stand-by mode. 26 (Continued) About the TP and TA indicators TP indicator Not lit Not lit Lit Lit TA indicator Not lit Lit Not lit Lit Meaning This programme does not carry traffic announcements nor does it refer, via EON, to a programme that does. This programme carries EON information about another programme which gives traffic information. This programme carries traffic announcements but none are being broadcast at present and may also carry EON information about other traffic announcements. A traffic announcement is being broadcast on this programme at present. In the following cases, the EON stand-by mode will be cancelled. q Press the ON/STAND-BY button to enter the stand-by mode. q When the unit is switched to another band in the EON stand-by mode q When you change the FM station whilst in the EON stand-by mode q When a preset call is made Notes: q During the same programme as the specified PTY (or TA) is being broadcast on the station you are receiving, the unit will not switch to other network station. q If there are more than two other network stations you want to listen to, compare the strength of each station's signal and tune in the station with the strongest signal. (EON-AF) However, if the frequency of other network station has been stored in the preset channel memory, the unit will switch to that preset channel. q If you want to cancel the reception of an ON (other network) station which was tuned in by the EON system and return to the original station you were receiving, press the EON button. q After the unit returns to the original station, the stand-by mode will still be active. (The "TI" or "PTY" will remain lit. ) q The unit will not switch from the ON station to another network station. [. . . ] Follow the guidelines below for maximum enjoyment from your CD collection and player. q Do not write on either side of the disc, particularly the non-label side. Signals are read from the non-label side. q Keep your discs away from direct sunlight, heat, and excessive moisture. [. . . ]