User manual SHARP MD-MS722H

[. . . ] Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: At full power prolonged listening to a personal stereo may damage the user's hearing. The model is in compliance with the law in case of using it with the SHARP earphones (model number RPHOH0004AWZZ). [. . . ] ) When the microphone picks up sound again, recording starts automatically. Notes: z Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. Z To use a microphone, be sure it is a plug-in-power type microphone. - When a plug-in-power type microphone is plugged in , the portable MD will provide power for the microphone's operation. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. If you don't, the recording will not be made properly. Z If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". Z Recording sensitivity can be changed whilst recording. MIC SYNC H : Recording starts when the unit detects -24 dB or more (the unit can start recording from quiet sounds). Playing time Each time the or button is pressed, the playing time of the previous or next track will be displayed. When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted. [. . . ] When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. Unplug the AC adaptor from the wall socket. Leave the unit completely unpowered for approximately 30 seconds. Plug the AC adaptor back into the wall socket and reoperate the unit. [. . . ]