User manual SHARP MD-MT280E

[. . . ] PORTABLE MINIDISC RECORDER MODEL Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. MD-MT280E OPERATION MANUAL PL U PO G W IN ER If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 TINSE0516AWZZ 03A R AO 1 E MD-MT280E Accessories -Accessories/Optional Accessories- Important Introduction Remote Control x 1 Earphones x 1 AC Adaptor (RADPA8058AWZZ) x 1 Connection Cable (for digit- Connection Cable (for anaal recording) x 1 logue recording) x 1 Connection Cable (for PC analogue recording) x 1 Carrying Bag x 1 Notes: z Parts and equipment mentioned in this operation manual other than those detailed above are not included. [. . . ] Press the button. ( To the MIC IN PLUG IN POWER socket 6 Stereo microphone (commercially available) ) Recording will start. To interrupt recording Press the button whilst recording. The track number will be increased by one each time you interrupt recording. To stop recording Press the :OFF/HOLD button. To write recorded contents on the MiniDisc Press the :OFF/HOLD button whilst in the stop mode. 1 2 28 Connect a stereo microphone to the MIC IN socket. Insert a recordable MiniDisc (page 11). 03/1/16 MD_MT280E_UK_4. fm MD-MT280E !Sound-actuated recording (Mic Synchronised recording) About pause function The unit automatically pauses when the microphone does not pick up any sound for 3 seconds or more. (Pause function does not work for approximately 10 seconds after a recording starts. ) When the microphone picks up sound again, recording starts automatically. 1 2 3 4 5 6 7 Press the REC button. Press the REC LEVEL or button to adjust the recording level. Select the recording mode (steps 5 - 9, page 17). Press the or button repeatedly to select "SYNC ON". Press the or button to select the recording start level. MIC SYNC H :Recording starts when the unit detects - 24 dB or more (the unit can start recording from quiet sounds). MIC SYNC L : Recording starts when the unit detects - 12 dB or more. - When a plug-in-power type microphone is plugged in, the portable MD will provide power for the microphone's operation. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. If you don't, the recording will not be made properly. " Use a microphone with a 3. 5 mm (1/8") diameter stereo mini plug. " If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". " Recording sensitivity can be changed whilst recording. -Recording from a Microphone- Useful Features Notes: " Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. " To use a microphone, be sure it is a plug-in-power type microphone. 6 5 4 3 2 1 8 9 Press the MENU/ENTER button. When a sound, such as person speaking, is picked up by the microphone, recording will begin automatically. 29 03/1/16 MD_MT280E_UK_4. fm MD-MT280E Recording from a Microphone (continued) !Track intervals When recording from the microphone, track numbers will be created automatically at regular intervals (default setting: approximately every 5 minutes). During a mic synchro recording, the unit pauses when a silence lasts for 3 seconds or more, and creates a track number. 5 6 Press the MENU/ENTER button. The mode will be set automatically after 7 seconds even if the MENU/ENTER button is not pressed. Track numbers will be created automatically at regular intervals. -Recording from a Microphone- Changing intervals between tracks Example: Set to "5 minutes". Useful Features 1 2 3 4 Press the MENU/ENTER button. [. . . ] Power source: DC 5 V: DC 1. 5 V: DC 4. 5 V: AC adaptor (AC 230 V, 50/60 Hz) Commercially available, "AA" size (LR6), alkaline battery x 1 Optional car adaptor, AD-CA20X (for cars with a 12 - 24 V DC negative earth electrical system) Power consumption: Output power: Dimensions: Weight: Input socket: Output socket: Type: Signal readout: Audio channels: Frequency response: Rotation speed: Error correction: Coding: Recording method: Sampling frequency: Wow and flutter: 7 W (AC adaptor) RMS: 20 mW (10 mW + 10 mW) (0. 2 % T. H. D. ) Width: 83 mm (3-9/32") Height: 28 mm (1-1/8") Depth: 77 mm (3-1/32") 109 g (0. 24 lbs. ) without battery Line/optical digital, microphone (powered by the main unit) Earphones (impedance: 32 ohms)/remote control unit Portable MiniDisc recorder Non-contact, 3-beam semiconductor laser pickup Stereo 2 channels/monaural 1 channel 20 - 20, 000 Hz ( 3 dB) Approx. 400 - 1, 800 rpm CLV ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Magnetic modulation overwrite method 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Unmeasurable (less than 0. 001 % W. peak) References 48 -Specifications- 03/1/16 MD_MT280E_UK_6. fm MD-MT280E Battery life: Stereo When using a commercially Continuous available, high capacity, "AA" recording: size (LR6), alkaline battery Approx. 8 hours Input sensitivity: Reference input level MIC H MIC L LINE " " " " 0. 25 mV 2. 5 mV 100 mV Input impedance 10 k ohms 10 k ohms 20 k ohms Earphones LINE Continuous play: Approx. [. . . ]