User manual SHARP MD-MT285E OPERATION MANUAL

[. . . ] MD-MT285E(UK) TINSE0539AWZZ 1 PORTABLE MINIDISC RECORDER MODEL Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. MD-MT285E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). TINSE0539AWZZ 03G R AO 1 E MD-MT285E Accessories -Accessories/Optional Accessories- Important Introduction Earphones x 1 AC Adaptor (RADPA8058AWZZ) x 1 Connection Cable (for analogue recording) x 1 Connection cable (for digital recording) x 1 Carrying Bag x 1 Notes: ! [. . . ] " To keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See "Editing a Recorded MiniDisc", page 40. ) TINSE0539AWZZ (UK) 28 MD-MT285E TINSE0539AWZZ 03/7/15 MD_MT285E_4. fm MD-MT285E !To create your own track numbers You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. The track number will be increased by one. One track number will be added every time the REC button is pressed. Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. In that case, wait until the next operation can be resumed. In stereo recording In 2 times long recording In 4 times long recording In monaural recording Within 40 seconds Within 80 seconds Within 160 seconds Within 80 seconds !Recording tracks as a single track You can record several pieces of music as a single track by disabling the auto marker function. When recording is paused or whilst recording. . . 1 2 3 4 1 2 3 4 5 Press the MENU/ENTER button. Useful Features Press the OFF". or button to select "MARK -Advanced Recording- Press the or button repeatedly to select "MARK". Press the MENU/ENTER button. 5 6 7 8 9 Press the MENU/ENTER button. Notes: " Complete the operation within 7 seconds whilst selecting the menus. " When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. TINSE0539AWZZ (UK) 29 MD-MT285E TINSE0539AWZZ 03/7/15 MD_MT285E_4. fm MD-MT285E Advanced Recording (continued) !Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). A series of tracks can be recorded as one by disabling the auto marker function (see page 29). " When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. " Track numbers may not be created properly, depending on the connected stereo system. Useful Features -Advanced Recording- About 1 second Silence First track Second track !About sampling rate converter This portable MD incorporates a sampling rate converter so that it can record from digital radios or DAT tape recorders. 2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). !Note for digital recording You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected. [. . . ] 52 hours References Stereo 2 channels/monaural 1 channel Frequency response: 20 - 20, 000 Hz ( 3 dB) Rotation speed: Approx. 400 - 1, 800 rpm CLV Error correction: ACIRC (Advanced Cross Interleave Reed-Solomon Code) Coding: ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Recording method: Magnetic modulation overwrite method Sampling frequency: 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Wow and flutter: Unmeasurable (less than 0. 001 % W. peak) Input sensitivity: Reference input level LINE Output level: Specified output Earphones TINSE0539AWZZ (UK) Audio channels: Battery life: When using a commercially available, high capacity, "AA" size (LR6), alkaline battery Stereo Continuous recording: Approx. 33 hours 2 times long 4 times long Continuous recording: Approx. [. . . ]