User manual SHARP MD-MT88

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP MD-MT88. We hope that this SHARP MD-MT88 user guide will be useful to you.

Lastmanuals help download the user guide SHARP MD-MT88.


Mode d'emploi SHARP MD-MT88
Download

You may also download the following manuals related to this product:

   SHARP MD-MT88 QUICK START GUIDE (190 ko)

Manual abstract: user guide SHARP MD-MT88

Detailed instructions for use are in the User's Guide.

[. . . ] PORTABLE MINIDISC RECORDER MODEL Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. MD-MT88H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 Accessories -Accessories/Optional Accessories- Important Introduction Earphones x 1 AC Adaptor (RADPA8046AWZZ) x 1 Connection Cable (for analogue recording) x 1 Notes: z Parts and equipment mentioned in this operation manual other than those detailed above are not included. [. . . ] z When the battery has run completely out, "BATT EMPTY" will appear. Then, the power will be disconnected automatically. Notes: z If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. z The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. z When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. z The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. Help Line: 08705 274277 (office hours) Web-site: www. sharp. co. uk/support 31 01/4/4 88UK_4. fm -Checking Displays- Battery Power , , Charging the rechargeable battery When a separately available rechargeable battery is used for the first time or when you use it after a long period of disuse, be sure to charge it fully. 1 Insert the rechargeable battery. A rechargeable battery other than the AD-N70BT cannot be charged. Useful Features -Battery Power- 2 3 Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket. Press the MODE/CHRG button. " " will flash, and battery will begin charging. z After the rechargeable battery is charged or used, it will get slightly warm. z When the portable MD is turned on or operating, the battery will not be charged. 32 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 01/4/4 88UK_4. fm , , About charging time After about 3. 5 hours have passed, " " will go out. The battery charging is about 90 % complete. To charge the battery fully, continue charging for about 2 more hours. In this case, you do not need to press the MODE/CHRG button. Even if the MODE/CHRG button is pressed, " " will not appear. Notes: z Charge the battery within the range of 5°C - 35°C (41°F - 95°F). z Charging is completed if " " does not blink when you plug in the AC adaptor and press the MODE/ CHRG button. z The unit can be left in the charging state after it is completed. Caution: z Use the specified battery AD-N70BT only. Do not charge a battery (nickel-cadmium, alkaline, etc. ) other than that specified. z Do not remove the outer cover of the rechargeable battery. It may cause heat generation, fire, or explosion. z Do not dip the battery in water, do not dispose of it in a fire, and do not take it apart. z If the rechargeable battery terminal is dirty, charging may not start. [. . . ] 400 - 900 rpm Rotation speed: ACIRC (Advanced Cross Interleave Reed-Solomon Code) Error correction: ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Coding: Recording method: Magnetic modulation overwrite method Sampling frequency: 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Unmeasurable (less than ±0. 001 % W. peak) Wow and flutter: Power source: DC 5 V: DC 1. 5 V: DC 1. 2 V: DC 4. 5 V: References 50 -Specifications- Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 01/4/4 88UK_6. fm Battery life: Stereo When using the optional rechargeable battery (fully charged) Continuous recording: Approx. 15 hours 2 times long Continuous recording: Approx. 10. 5 hours Continuous recording: Approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MD-MT88

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MD-MT88 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag