User manual SHARP MX-1810U START GUIDE

[. . . ] View the Operation Guide when you use the machine after the initial setup is completed. Keep this manual close at hand for reference whenever needed. For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. [. . . ] Do not install the machine in a location with poor air circulation. A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide sufficient air circulation. * Install the machine so that people are not directly exposed to exhaust from the machine. If installed near a window, ensure that the machine is not exposed to direct sunlight. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. to prevent the loss of important documents in the unlikely event of a hard drive failure , keep the originals of important documents or store the original data elsewhere. With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data. High-voltage parts inside the machine may cause electrical shock. Do not make any modifications to this machine. Doing so may result in personal injury or damage to the machine. Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result. If you notice smoke, a strange odor, or other abnormality, do not use the machine. If used in this condition, fire or electrical shock may result. Immediately switch off the main power and remove the power plug from the power outlet. contact your dealer or nearest authorised service representative. If a thunder storm begins, switch off the main power and remove the power plug from the outlet to prevent electrical shock and fire due to lightning. If a piece of metal or water enters the machine, switch off the main power and remove the power plug from the power outlet. contact your dealer or nearest authorised service representative. Using the machine in this condition may result in electrical shock or fire. [. . . ] This function is used to forward all data transmitted and received by the machine to a specified destination (Scan to E-mail address, Scan to FTP destination, Scan to Network Folder destination, or Scan to Desktop destination). This function can be used by the administrator of the machine to archive all transmitted and received data. If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network. [. . . ]