User manual SHARP MX-4500N

[. . . ] The Operation Guide can be downloaded from the Web pages in the machine. Download the Operation Guide from the Web pages in the machine. Operation Guide For detailed information For the downloading procedure, see "Downloading the Operation Guide" (page 3). Convenient methods for using the Operation Guide The first page contains a regular table of contents as well as an "I want to. . . " table of contents. "I want to. . . " lets you jump to an explanation based on what you want to do. For example, "I use the copier function often, so I'd like to save paper". [. . . ] See "PRINTING" (page 48) for the procedure for opening the printer driver properties window and the basic procedure for printing. Windows The procedure for selecting settings in the printer driver is explained below using "Fitting the print image to the paper (Fit To Paper Size)" as an example. The Fit To Paper Size function is used to automatically enlarge or reduce the print image to fit the selected paper size. In this example, an A4 size image will be printed on A3 size paper. The procedures for configuring printer driver settings vary by setting. For more information on each setting, see "FREQUENTLY USED FUNCTIONS" and "CONVENIENT PRINTING FUNCTIONS" in "3. PRINTER" in the Operation Guide. Select print settings. (1) Click the [Paper] tab. (1) (2) Select [A4]. Select the size of the print image. (3) Select [Fit To Paper Size]. (2) (4) Select [A3]. Select the size of paper that you want to print on. (3) (4) (5) Click the [OK] button. This completes the settings. Start printing. (5) 54 Macintosh The procedure for selecting printer driver settings is explained below using "Printing multiple images on one page (N-Up Printing)" as an example. This function reduces the size of each page to let you print multiple pages on one sheet of paper. The example of printing two pages on one sheet of paper with borderlines is explained. The procedures for configuring printer driver settings vary by setting. For more information on each setting, see "FREQUENTLY USED FUNCTIONS" and "CONVENIENT PRINTING FUNCTIONS" in "3. (12) [Special Modes] key Touch this key to use a special mode. (13) key / key / key Use these tabs to change the mode of the image send function. To switch to fax mode, touch the [Fax] tab. (2) [Address Book] key Touch this key to dial using a one-touch key or group key. When the key is touched, the address book screen appears. (3) [Direct TX] key Touch this key to send a fax by direct transmission. When the [Direct TX] key is not highlighted, normal transmission (memory TX mode) is selected. (4) [Sub Address] key Touch this key to enter a sub-address and passcode for F-code transmission. (5) Customized keys The keys that appear here can be changed to show settings or functions that you prefer. (6) [Preview] key Touch to check the image that will be sent in the touch panel before transmission. (7) key Touch this key to retrieve a destination using a search number. * * 3-digit number assigned to a destination when it is stored. [. . . ] When the key is touched, instructions for removing the misfeed will appear. When the misfeed is cleared, the message will automatically clear. The blinking mark in the image at left indicates the approximate position of the misfeed. Misfeed location A misfeed has occurred. Touch the [Information] key to display the following screen. Information OK (D) Misfeed Removal Open the center cover and remove the misfed originals. Exit (A) Instructions for removing the misfeed appear here. [. . . ]