User manual SHARP MX-M550 BROCHURE

[. . . ] Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. Required in IEC-950 (EN 60 950) - Europe · The equipment should be installed near an accessible socket outlet for easy disconnection. Required in Appendix ZB of BS 7002 (En 60 950) -- United Kingdom MAINS PLUG WIRING INSTRUCTIONS The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse to BS1362 marked or and of the same rating as the one removed from the plug must be used. Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without the fuse cover fitted. [. . . ] Bond)) SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper Supplied from the machine 376 mm (W) x 554 mm (D) x 523 mm (H) (14-13/16" (W) x 21-13/16" (D) x 20-19/32" (H)) Approx. 28 kg (61. 8 lbs. ) Overall dimensions when 1031 mm (W) x 771 mm (D) (15-13/64" (W) x 30-11/32" (D)) (Dimensions when the bypass tray (MX-MFX1) is also installed. ) attached to machine * Requires the bypass tray (MX-MFX1). 12 SPECIFICATIONS Large capacity tray (MX-LCX3N) specifications Model Paper sizes Paper weight Paper capacity Paper types Power supply Dimensions Weight MX-LCX3N* A3W, A3, B4, A4, A4R, B5, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R 60 g/m2 to 205 g/m2 (16 lbs. Bond)) SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper Supplied from the machine 700 mm (W) x 588 mm (D) x 522 mm (H) (27-9/16" (W) x 23-9/64" (D) x 20-35/64" (H)) Approx. 50 kg (110. 3 lbs. ) Overall dimensions when 1571 mm (W) x 771 mm (D) (61-13/64" (W) x 30-11/32" (D)) attached to machine * Can be installed on the MX-M850. Also requires the bypass tray (MX-MFX1). Bypass tray specifications Model Paper sizes Paper weight Paper capacity Paper types Dimensions Weight MX-MFX1 A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16k, 16KR, (Includes automatic paper size detection function. Paper size can be entered. ) 60 g/m2 to 300 g/m2 (16 lbs. Index)) Standard paper 100 sheets (80 g/m2 (21 lbs. Bond)) SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper, transparency film, tab paper, and label sheets 198. 8 mm (W) x 503. 5 mm (D) x 361. 2 mm (H) (7-53/64" (W) x 19-53/64" (D) x 14-7/32" (H)) Approx. 5. 1 kg (11. 3 lbs. ) Inserter specifications Model MX-CFX2* A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8K, 16k, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm (Includes automatic paper size detection function. Paper size can be entered. ) 60 g/m2 to 205 g/m2 (16 lbs. Index) (When fed from the main unit, 52 g/m2 to 300 g/m2 (16 lbs. *4 Up to 30 sheets can be stapled when the sheets are the same width but different lengths (A3 and A4, B4 and B5, 11" x 17" and 8-1/2" x 11"). In this case, up to 50 sets can be output to the offset tray. *5 The maximum number of sheets for stapling assumes a paper weight of 80 g/m2 (21 lbs. Bond) and includes two cover sheets that are 176 g/m2 (65 lbs. Cover). 15 SPECIFICATIONS Saddle stitch finisher specifications Model Paper sizes MX-FNX7*1 A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm Top tray: 52 g/m2 to 205 g/m2 (16 lbs. Index) Offset tray: 52 g/m2 to 300 g/m2 (16 lbs. Index) Non-staple, staple, saddle stitch Paper weight Modes Top tray 250 sheets (A4, 8-1/2" x 11" or smaller) 50 sheets (B4, 8-1/2" x 14" or larger) Non-stapling: 2000 sheets (A4, 8-1/2" x 11") 1000 sheets (A3W, A3, B4, A4W, A4R, B5, B5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm) 100 sheets (A5R, 5-1/2" x 8-1/2"R) Supplied from the machine 657 mm (W) x 613 mm (D) x 960 mm (H) (25-55/64" (W) x 24-1/8" (D) x 37-25/32" (H)) Approx. 60. 5 kg (133. 4 lbs. ) Stapling: 150 sets or 1950 sheets (A4, 8-1/2" x 11") 100 sets or 1000 sheets (A4R, B5, 8-1/2" x 11"R) 100 sets or 990 sheets (A3, B4, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K, 16K, 16KR) Tray capacity*2 Offset tray*3, 4 Power supply Dimensions Weigh Overall dimensions when 1957. 5 mm (W) x 771 mm (D) (77-3/64" (W) x 30-11/32" (D)) attached to machine Stapler section A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16K, 16KR (Four stapling positions: one staple at bottom left corner, one staple at top left corner, one slanted staple at top left corner, and two staples. ) 60 g/m2 to 105 g/m2 (16 lbs. Bond) 50 sheets (A4, A4R, B5, B5R, 8-1/2" x 11", 8-1/2" x 11"R), 30 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K, 16K, 16KR) (30 sheets when the sheets are the same width but different lengths. ) Fold in half and staple in two places on centreline Fold at centreline (can be adjusted in the System Settings) A3W, A3, B4, A4R, B5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R Allowed paper sizes for stapling Paper weight for stapling Maximum number of sheets for stapling*4, 5 Saddle stitch section Stapling method Folding position Allowed paper sizes for saddle stitch stapling Allowed paper weights for 60 g/m2 to 90 g/m2 (16 lbs. Bond) (For covers, paper up to 176 g/m2 (65 lbs. Cover) can be used. ) saddle stitch stapling Maximum: 15 sheets / 10 sets (11 to 15 sheets), 15 sets (6 to 10 sheets), 30 sets (2 to 5 sheets) Number sheets for saddle stitch stapling / Number of sets *1 Can be installed on the MX-M850. [. . . ] · IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. · Sharpdesk is a trademark of Sharp Corporation. · All other trademarks and copyrights are the property of their respective owners. Candid and Taffy are trademarks of Monotype Imaging, Inc. [. . . ]