User manual SHARP MX-PEX2

[. . . ] 5 USING SECURE PRINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 DISPLAY OF FIERY PRINT JOBS . . . . . . . . . . . . . . . . . . . . . . . . 8 Fiery screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (When using the Web pages of the machine, select "All Jobs" in the [Job Classification] menu. ) 1 Operation on a machine When the Fiery Print Controller is installed, operation using the operation panel changes as described below. System Settings A key for Fiery Print Controller settings is added to the system settings (administrator). In addition, certain restrictions apply to the regular system setting items. ( "SYSTEM SETTINGS" (page 3 of this manual)) Secure Print The user information in the Fiery Print Controller can be used for secure printing. ( "USING SECURE PRINT" (page 6 of this manual)) Display of print jobs A screen is added to display Fiery print jobs that are waiting to be printed. ( "DISPLAY OF FIERY PRINT JOBS" (page 8 of this manual)) Security Settings When the Fiery Print Controller is installed on a machine with the Data Security Kit installed, certain restrictions apply to the security settings in the system settings (administrator). ( "SECURITY SETTINGS" (page 9 of this manual)) Fiery Web Tools When the Fiery Print Controller is installed, the button is added to the menu list in the Web pages of the machine. When this key is clicked, "Fiery Web Tools" appears. This is used to configure settings for the Fiery Print Controller. For the information on Fiery Web Tools, see the manual on the CD-ROM that accompanies the Fiery Printer Controller. 2 SYSTEM SETTINGS When the Fiery Print Controller is installed, the "Printer Condition Settings" do not appear in the system settings. The [Fiery Settings] key and [Remote Auto Color Calibration Mode] key are added to the "Printer Settings", and restrictions apply to the previous settings. [MX-5500N/6200N/7000N] Touch the [Fiery] icon in the system bar and enter the administrator password, then touch the [OK] key. (The display method differs from the previous "Printer Settings". ) Administrator Password Cancel OK Printer Settings(Fiery) OK Enter the administrator password. (From 5 to 32 characters) Password ***** Fiery Settings Remote Auto Color Calibration Mode (2) [MX-3500/4500 series] System Settings Printer Settings Default Settings Interface Settings Fiery Settings (1) (3) OK 1/2 System Settings Printer Settings Remote Auto Color Calibration Mode OK 2/2 NOTE The additions and changes to the system settings explained in this manual also apply to the Web pages of the machine. 3 Fiery Settings When the [Fiery Settings] key is touched, the following screen will appear. This screen allows various settings to be selected when printing using the Fiery Print Controller. Fiery Settings Back Continue to Setup?Yes OK Run Setup After selecting or changing Fiery settings, touch the [Back] key (MX-3500/4500 series: ) to return to the printer settings screen. For detailed information on the settings, see the manual on the CD-ROM that accompanies the Fiery Print Controller. NOTE When the Fiery Print Controller* is installed, configure the IP address and other network settings in the "Fiery Settings". * After changing the IP address in the "Fiery Settings", restart the machine. [. . . ] However, note that unlike regular print jobs, Fiery print jobs cannot be reprinted from the job status complete screen. To reprint a print job, see the manual (Utilities. pdf) for CommandWorkstation. 8 SECURITY SETTINGS When the Fiery Print Controller is installed on a machine that has the Data Security Kit installed, several of the security functions related to printing change. For detailed information on the security settings, see the manual that accompanies the Data Security Kit. [. . . ]