User manual SHARP NA-V121HR INSTALLATION GUIDE

[. . . ] · Usecautionwheninstallingormodifyingtelephonelines. · Avoidusingatelephone(otherthanacordlesstype)duringanelectricalstorm. Theremaybearemoteriskofelectricshockfromlightning. · Donotuseatelephonetoreportagasleakinthevicinityoftheleak. · Donotinstallorusethemachinenearwater, orwhenyouarewet. Takecarenottospillanyliquidsonthemachine. [. . . ] E-mail The scanned original is attached to an e-mail and sent. Fax The scanned original is sent using the telephon line. FTP/Desktop The scanned file is sent to a specified directory of an FTP server or to a specified folder on a computer connected to the network. Copy The scanned original is printed. Network folder The scanned original is sent to the specified shared folder on a computer connected to the Windows network. Scroll area Up to 12 icons are displayed. Icons that are not displayed can be displayed by scrolling horizontally. PC scan A TWAIN-compliant application on a computer connected to the network is used to scan a document or image. Fixed area Up to 10 icons are always displayed. Job status Displays the status of the current job. HDD file retrieve The scanned original is saved. Saved data can be edited and used again for another operation. System settings Operation Guide Refer to the Operation Guide when you have questions about operating the machine. Allows various settings to be adjusted according to how the machine will be used or its current state of use. OPERATING THE TOUCH PANEL In addition to the conventional "single tap" operation, you can also operate the touch panel using long touches, flicks, and slides. Tap Touch and then quickly release the finger. Used to select keys, tabs, checkboxes, etc. Double-tap Lightly strike the touch panel two times. Slide Slide the finger on the scroll bar to move up or down through a long list. Long-touch Touch a key and keep the finger on the key for a short time. Flick Flick (quickly swipe with the finger) to scroll the preview image. Drag Drag (slide the finger in the desired direction) to rotate or delete original pages displayed as a preview. 13 OVERVIEW OF COPY OPERATION Step 1 Select a function Step 2 Place the original Select the Copy icon. Select the automatic document feeder or the document glass according to the type of original. Place the original in the automatic document feeder Insert all the way Do not pass this line Align the edges Tap Place image-side up Adjust to original size Print 1 set of copies Place the original on the document glass Align to corner Tap Placing a thick book Lift open Place image-side down MX-4112N / NA-V121HR 14 Step 3 Scan Step 4 Confirming while viewing the preview Confirmation Face up/down, orientation, missing pages, folded pages Step 5 Start Confirm the results of the scan and any edits or settings. Enter the number of prints and start printing. Scan the original Tap Tap Print Scan another original Tap Output settings Editing Page editing, deleting, etc. Document filing The scanned original and the settings are saved on the hard disk and can be used again. Drag 15 OVERVIEW OF OTHER OPERATIONS Step For functions other than copy. 1 Select a function Step 2 Place the original Step 3 Scan Step 4 Confirmation Step 5 Start Fax Place the original in the automatic document feeder Insert all the way Do not pass this line Align the edges Upward Transmission Confirmation Face up/down Orientation Missing pages Folded pages Select the address Tap E-mail Adjust to original size Tap Place the original on the document glass Align to corner Placing a thick book Storing Downward Lift open HDD file retrieve Select the folder Tap Scan and store the file 16 MAINTENANCE Replacing a toner cartridge When toner runs low, the colour and the message "Prepare a new toner cartridge. " appears. Prepare a new toner cartridge for the indicated colour. Can calculate zoom rate when mm is specified. 500 × 2 sheets in 2 trays plus 100-sheet multi-bypass tray Using 80 g/m2 (21 lbs. ) weight paper 5, 600 sheets in 4 trays (500 × 4) plus 100-sheet multi-bypass tray plus 3, 500 sheets in large capacity tray Using 80 g/m2 (21 lbs. ) weight paper Max. 999 copies Standard: 2 GB HDD: 160 GB SD card capacity is less. 10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1, 013 hpa 20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH) Local voltage ± 10 % (For the power supply requirements, see the name plate in the lower corner of the left side of the machine. ) Power consumption Max. 1. 84 kW (220 to 240 V) / 1. 92 kW (100 to 127 V) (including options such as the desk) When MX-RP14 is installed 643* mm (W) × 761 mm (D) × 801 mm (H) (25-5/16" (W) × 29-61/64" (D) × 31-17/32" (H)) When MX-EF10 is installed 643* mm (W) × 761 mm (D) × 801 mm (H) (25-5/16" (W) × 29-61/64" (D) × 31-17/32" (H)) * Including the bypass tray When MX-RP14 is installed Approx. 118 kg (260 lbs. ) When MX-EF10 is installed Approx. 127 kg (280 lbs. ) 4 GB PCL accelerator 1 GB 1 GB = One billion bytes when referring to hard drive capacity. Actual format This may vary depending on the ambient conditions. This may vary depending on the state of the machine. * Continuous speed for same original source. Output may be temporarily interrupted to stabilize image quality. 982 mm (W) × 695 mm (D) (39-9/32" (W) × 27-13/16" (D)) 969 mm (W) × 695 mm (D) (38-49/64" (W) × 27-13/16" (D)) 18 Automatic document feeder Name Document feeder types Original paper sizes Paper weight Original paper types Two-sided MX-4112N NA-V121HR Reversing Single Pass Feeder (MX-RP14) Duplex Single Pass Feeder (MX-EF10) Reversing Single Pass Feeder (RSPF) Duplex Single Pass Feeder (DSPF) A3 (11" × 17") to A5 (5-1/2" × 8-1/2") Thin paper 35 g/m2 (9 lbs. ) to 49 g/m2 (13 lbs. ) Plain paper 50 g/m2 (13 lbs. ) to 128 g/m2 (34 lbs. ) 50 g/m2 (13 lbs. ) to 105 g/m2 (28 lbs. ) 50 g/m2 (13 lbs. ) to 128 g/m2 (34 lbs. ) Scan speed (copy) Paper storage capacity B/W Colour 100 sheets (80 g/m2 (21 lbs. )) 51 sheets/minute (600 × 600 dpi) 51 sheets/minute (600 × 600 dpi) 150 sheets (80 g/m2 (21 lbs. )) 75 sheets/minute (600 × 400 dpi) 51 sheets/minute (600 × 600 dpi) (or maximum stack height of 13 mm (1/2")) (or maximum stack height of 19. 5 mm (50/64")) When scanning one-sided, A4 (8-1/2" × 11") horizontal documents Tray Stand / 1 × 500 Name Paper sizes Useable paper Paper capacity Sheet paper drawer (MX-DE15) Stand / 2 × 500 Sheet paper drawer (MX-DE16) Large capacity tray (MX-LC11) A4 (8-1/2" × 11"), B5 60 g/m2 (16 lbs. ) to 105 g/m2 (28 lbs. ) 3, 500 Weight Dimensions MX-DE15 / MX-DE16 615 mm (W) × 670 mm (D) × 271. 2 mm (H) (24-39/64" (W) × 26-52/64" (D) × 10-55/64" (H)) MX-LC11 376 mm (W) × 523 mm (D) × 575 mm (H) (15-13/32" (W) × 20-59/64" (D) × 23" (H)) MX-DE15: Approx. 30 kg (66 lbs. ) A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R) 60 g/m2 (16 lbs. ) to 220 g/m2 (59 lbs. ) 500 sheets 500 × 2 Finisher Name Paper sizes Useable paper No. of trays Finisher (MX-FNX9) Depends on feeder specifications Paper weight 1 Non-stapled A3 wide (12" × 18") / A3 (11" × 17") / B4 (8-1/2" × 14"): 250 sheets A4 (8-1/2" × 11") / A4R (8-1/2" × 11"R) / B5 / B5R (7-1/4" × 10-1/2"R) / A5R (5-1/2" × 8-1/2"R): Tray capacity (80 g/m (21 lbs. )) 2 Max. [. . . ] · Sharp OSA is a trademark of Sharp Corporation. · RealVNC is a trademark of RealVNC Limited. · All other trademarks and copyrights are the property of their respective owners. Candid and Taffy are trademarks of Monotype Imaging, Inc. [. . . ]