User manual SHARP PC-AX20

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the distance between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] CAUTION FOR LASER Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Maximum output and wavelength of the laser: 903µW, 785nm 4 Precautions CLASS 1LASER PRODUCT LASER KLASSE 1 · · · · · · · · · · 4-6 Do not disassemble the CD-ROM drive unit and do not repair by yourself, otherwise it may cause electrical shock hazard, or a laser may damage your eyes. Do not store or use the CD-ROM drive unit in a dusty, humid, oily environment, or under damp or moist conditions. Do not turn up the volume too high, when using the headphones. Do not leave the CD-ROM drive unit in direct sunlight, near a heat source or especially in a hot automobile. Do not drop or jar the CD-ROM drive unit. Do not touch the pins/terminals of the USB cable. When the CD-ROM drive unit has been moved from a cold place to warm place, it may damp or moist. Keep magnetic objects away from the CD-ROM drive unit. Do not insert any foreign metal object inside the CD-ROM drive unit. Do not touch the lens. · If noise is heard from radio or TV, move the CD-ROM drive unit 2 m (about 6 ft. ) away from the radio or TV. Connecting Optional External CD-ROM Drive Unit (CE-CD05) · Do not place the CD-ROM drive unit on its side or upside down. Click Unplug or Eject Hardware icon ( Click Stop USB Mass Storage Device. Click OK; then, remove the USB cable from the computer. ) on the taskbar. In Windows XP Professional 1. Click Safely Remove Hardware icon ( ) on the taskbar. Click Safely remove USB Mass Storage Device; then, Safe To Remove Hardware dialog appears. Remove the USB cable from the computer. Mode Switches There are the mode switches on the bottom of the CD-ROM unit. These switches are for technical services. Mode Switches 4-10 Cleaning Optional External CD-ROM Drive Unit · · · Do not use solvents such as benzine, thinner, alcohol, record cleaner or antistatic spray. Clean the outside of the drive with a soft, dried cloth. Clean the lens with a commercial lens blower if the lens is dirty. 4 4-11 Display You can use an external monitor with your computer. To display images on both displays simultaneously, use the 1024x768 resolution. [. . . ] Free up an IRQ from a built-in device (Windows 2000 only). Troubleshooting Question: Why can't I print? · · · · · · Make sure the printer is turned on. Check whether the computer and the printer are connected correctly. Check whether the printer is ready to print. Check whether the printer has enough paper. [. . . ]