User manual SHARP PC-FS2417 SUPPLEMENT

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. [. . . ] note: · Each time the key is used in the subtraction, 1 will be subtracted from the count. The count is printed when the memory is recalled. If the count exceeds the maximum, the counter will recount from zero. Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. 1) 2) Turn the power on and feed the paper by pressing . 2) 3) Lift the attached metal paper holder up and insert the paper roll to the paper holder. This machine can also be operated on AC power by use of AC Adaptor. When the AC adaptor is connected to the calculator, the power source is automatically switched over from dry batteries to AC power source. Note: The decimal point floats during successive calculation by the use of or If the decimal selector is set to "F" then the answer is always rounded down ( ). Enter in the order of month, day and year, then press · Use to separate month, day, and year. when this occurs , "E" will be displayed. The contents of the memory at the time of the error are retained. " is displayed at the time of the error, "­ ­ ­ ­ ­ ­ ­" will be printed in red and must be used to clear the calculator. also , in rare cases , printing may stop midway and the indication "E" appear on the display. This is not a malfunction but is caused when the calculator is exposed to strong electromagnetic noise or static electricity from an external source. Should this occur, press key and then repeat the calculation from the beginning. When the integer portion of an answer exceeds 12 digits. When the integer portion of the contents of the memory or grand total memory exceeds 999999999999 1 ) 12 digits. Time for battery replacement Life of the memory protection battery is approximately 2, 500 hours at 25°C(77°F) with no operation battery installed, and the AC adaptor not connected. * When the memory protection battery is weak, the date/time setting is initialised (1/1/2005, 12:00:00 a. Verify the date/time setting in the date/clock display mode after replacing the operation battery or when connecting the AC adaptor with no operation battery installed. [. . . ] 8 W Operating time: Manganese dry battery, size AA (or R6) Approx. 4, 500 hours (in non-print mode, displaying 555'555 at 25°C (77°F) ambient temperature) Operating time depends on the type of battery and type of use. ) (with batteries) Accessories: 1 lithium battery(installed), 1 battery replacement date label (attached on the unit's back body), 1 paper roll, 1 ink roller (installed), AC adaptor EA-63A, and operation manual EXAMPLE 2: Determine the selling price for 30% margin when the cost price is set at $350. *3 : Press to clear the memory before starting a memory calculation. [. . . ]