User manual SHARP PC-GP2520 SETUP GUIDE

[. . . ] : Minus symbol Appears when a number is negative. : Error symbol Appears when an overflow or other error is detected. : Grand total memory symbol Appears when a number is in the grand total memory. The calculator should be kept in areas free from extreme temperature changes, moisture, and dust. [. . . ] Never attempt to turn the printing belt or restrict its movement while printing. Do not rotate the printing mechanism manually, this may damage the printer. "3 2 1 0": Presets the number of decimal places in the answer. Use of the add mode permits addition and subtraction of numbers without entry of the decimal point. Use of , and will automatically override the add mode and decimally correct answers will be printed. Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. 1) 2) Turn the power on and feed the paper by pressing . 2) 3) Lift the attached metal paper holder up and insert the paper roll to the paper holder. 2) 3) Soulevez le support métallique pour papier et introduisez le rouleau de papier dans le support pour papier. Note: The decimal point floats during successive calculation by the use of or . EXAMPLE 2: Perform two calculations using $840 and $525, both of which already include tax. Markup and Profit Margin are both ways of calculating percent profit. Calculate the dollar difference (a) and the percent change (b) between two yearly sales figures $1, 500 in one year and $1, 300 in the previous. SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. aLL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. [. . . ] (c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to software, paper and batteries. (d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to batteries, AC adapters, ribbons, correction tapes, ink rollers, cables, printwheel, or paper. (e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear. (f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage. [. . . ]