User manual SHARP PG-LW2000

[. . . ] Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix PG-LW2000 DATA PROJECTOR MODEL OPERATION MANUAL IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packag ing, please ensure that you have checked the contents of the carton thoroughly against the list of “Supplied accessories” on page 3. Model No. : Serial No. : SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse and of the same rating as above, which is also indicated on the pin face marked or of the plug, must be used. [. . . ] “Quick Start Menu” Main menu Quick Start Menu Input Search Start “Picture” menu Sub menu Main menu Picture Picture Mode Sub menu Page 36 Resolution Page 38 Page 38 Standard Presentation Movie Game sRGB Page 36 Resize Page 36 Keystone -80 +80 Normal Full Native Area Zoom V-Stretch Border 16:9 Contrast Bright Color Tint Sharp Red Blue -30 -30 -30 -30 -30 -30 -30 +30 +30 +30 +30 +30 +30 +30 Page 36 Eco + Quiet [On/Off] Page 36 Language Page 39 English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe CLR Temp Tiếng Việt -1 1 Page 36 Page 39 BrilliantColor™ 0 2 Page 39 Information C. M. S. Setting [On/Off] Page 36 Go To Complete Menu Page 39 C. M. S. Page 36 Page 39 Film Mode Page 40 DNR Auto Off Level 1 Level 2 Level 3 Page 40 Eco+Quiet [On/Off] Page 40 Reset C. M. S. -Hue R Y G C B M Reset -30 -30 -30 -30 -30 -30 +30 +30 +30 +30 +30 +30 Page 39 C. M. S. -Saturation Page 39 C. M. S. -Value Page 39 Reset Return 32 “Signal adjustment (SIG-ADJ)” menu Main menu SIG-ADJ Clock Phase H-Pos V-Pos Reset -150 -30 -150 -60 +150 +30 +150 +60 “Screen adjustment (SCR-ADJ)” menu Main menu SCR - ADJ Resize Sub menu Sub menu Page 41 Page 43 Page 43 Image Shift -40 +40 Page 43 Keystone -80 +80 Normal Full Native Area Zoom V-Stretch Border 16:9 Page 41 Resolution Page 41 Signal Type Page 43 Overscan [On/Off] Page 41 Dynamic Range Auto RGB YPbPr Auto Standard Enhanced Auto PAL SECAM NTSC4. 43 NTSC3. 58 PAL-M PAL-N PAL-60 Page 44 OSD Display [On/Off] Page 44 Closed Caption Page 41 Video System Page 44 Background Off CC1 CC2 Logo Blue None Page 42 Page 45 Setup Guide [On/Off] Page 45 PRJ Mode Video Setup Page 42 Signal Info 0 IRE 7. 5 IRE Page 45 Wall Color Front Ceiling + Front Rear Ceiling + Rear Off Blackboard Whiteboard English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe Tiếng Việt Page 42 Page 45 Language Page 45 33 Useful Features Menu Items (Continued) “Projector adjustment (PRJ-ADJ1/2)” menu Main menu PRJ-ADJ1 Auto Sync [On/Off] Sub menu Page 46 Page 46 Auto Power Off [On/Off] Page 46 Auto Restart [On/Off] Page 46 Speaker [On/Off] Page 46 Fan Mode Page 46 System Lock [Enable/Disable] Normal High Page 47 Keylock [On/Off] Page 48 Main menu PRJ-ADJ2 Quick Start Menu [On/Off] Sub menu Page 46 Page 49 FUNCTION Button Page 49 STANDBY Mode Input Search Audio Mute Image Shift Signal Info Quick Start Eco Page 49 DLP® LinkTM [On/Off] Page 49 DLP® LinkTM Invert Page 49 All Reset Page 49 Lamp Timer (Life) Page 49 34 Using the Menu Screen Select from the Quick Start Menu, which is a collection of the most frequently used functions, or the Complete Menu, which enables advanced settings and adjustments. Adjustment buttons (P/R/O/Q) ENTER button MENU button MENU button ENTER button Adjustment buttons (P/R/O/Q) RETURN button • Press RETURN to return to the previous screen when the menu is displayed. Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 2 3 Press MENU. • The “Quick Start Menu” screen for the selected Input mode is displayed. Input Search Start Resolution Resize Keystone Eco+Quiet Language Information Example Quick Start Menu 1024×768 Normal 0 Off English Go To Complete Menu… Press P or R to select the desired item, then press ENTER. Press P/R/O/Q to adjust the item selected, then press ENTER. Useful Features Info • To display the advanced settings and adjustments, select “Go To Complete Menu”. Press ENTER to display the Complete Menu screen. • If you do not want to display the Quick Start Menu, set “Go To Complete Menu” - “PRJ-ADJ2” - “Quick Start Menu” to “Off”. ENTER END 35 Using the Menu Screen (Continued) Quick Start Menu The following items can be configured on the Quick Start Menu. Selectable items Input Search Start Resolution Description Automatically searches for and switches to the appropriate Input mode. Pressing an operation button during input searching cancels the search. Use this function when the image and screen size do not match with the resolution selected automatically. Use this function to stretch the image vertically or horizontally or when the edges of the image cannot be seen. (See page 43. ) Corrects the keystone distortion of projected images. Use this function to correct the trapezoidal distortion of images caused when projecting images at an angle to the screen. (See page 43. ) When set to “On”, this function reduces the cooling fan noise and power consumption, thereby prolonging the operating life of the lamp. (See page 40. ) Selects the language displayed on the screen. (See page 45. ) Displays the input signal, lamp use time, remaining lamp life, etc. Displays the Complete Menu for advanced settings and adjustments. Resize Keystone Eco+Quiet Language Information Go To Complete Menu Note • The setting of Resize mode will be made independently for each Input mode. • The setting of Eco+Quiet mode will be made independently for each Input mode and each Picture mode. Menu Selections (Complete Menu) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector. 1 2 3 Press MENU. • The “Quick Start Menu” screen is displayed. Example: “Picture” screen menu for COMPUTER (RGB) input Menu item Picture SIG SCR 0 0 0 0 0 1 On Level 2 Off ENTER END PRJ1 PRJ2 Standard Press P or R to select “Go To Complete Menu”. Press Q or O and select “Picture” to adjust. Info • When “PRJ-ADJ2” - “Quick Start Menu” is set to “On”, pressing MENU displays the Quick Start Menu screen. Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C. M. S. DNR Eco+Quiet Reset SEL. /ADJ. 36 4 Press P or R and select “Bright” to adjust. • The selected item is highlighted. Picture SIG SCR 0 0 0 0 0 1 PRJ1 PRJ2 Standard Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C. M. S. DNR Eco+Quiet Reset SEL. /ADJ. On Level 2 Off Single ADJ END Items to be adjusted Pict. SIG SCR-ADJ 0 0 PRJ1 PRJ2 To adjust the projected image while watching it Press ENTER. • The selected item (e. g. “Bright”) is displayed by itself at the bottom of the screen. • When pressing P or R, the following item (“Red” after “Bright”) will be displayed. Resize Image Shift Keystone Normal Press ENTER. [. . . ] Problem Page – – – – 65 – – – – This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes. 68 For SHARP Assistance If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting” section on pages 66 to 68. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U. S. A. [. . . ]