User manual SHARP PN-G655U

[. . . ] IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly Approved by the manufacturer could void the user's authority to operate this equipment. [. . . ] In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. Depending on the original image size, black bands may remain at the edges of the screen. This section describes how to use the menu items. Name of the menu Input mode An item being selected (highlighted) Screen resolution of input signal, and other data. , make settings and then Twice to close the menu screen. The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING and SCHEDULE screens will close in about 4 minutes. The color mode on the screen can also be changed using a remote control unit. G-CONTRAST Adjusts green component when the WHITE BALANCE is set to USER. B-CONTRAST Adjusts blue component when the WHITE BALANCE is set to USER. Use this automatic adjustment when you use the PC2 input terminal or PC3 input terminals to display a PC screen for the first time or when you change the setting of the PC. When using the adjustment pattern (see page 23), make adjustments so that no vertical stripe noise appears in it. pHASE Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/ or there are flickers at corners. When using the adjustment pattern (see page 23), make adjustments so that no horizontal stripe noise appears in it. * Adjustments to PHASE should be made only after CLOCK has been correctly set. Selecting + changes the color towards green, and selecting - changes it towards magenta. ADVANCED (AV input) You can adjust more specifically. SCREEN MOTION Residual images are reduced by moving the screen. A black screen spreads from the bottom of the screen and then shrinks to the bottom of the screen. [. . . ] When this occurs, "TEMPERATURE" is displayed on the screen and the Power LED flashes red and green alternately. (The Power LED continues flashing red and green alternately. If the monitor enters standby mode due to a rise in temperature, to return to normal display, turn the main power switch off and then back on again. The monitor, however, will enter standby mode again if the cause of the temperature rise is not eliminated. [. . . ]