User manual SHARP PN-K321

[. . . ] PN-K321 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:  REDUCE THE RISK OF ELECTRIC TO SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. • Depending on the original image size, black bands may remain at the edges of the screen. 17 E Menu Items Displaying the menu screen Video adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 19 to 21 for details of each menu items. Caution TIPS • The menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds. nMenu screen display 1 PICTURE SETUP MONITOR PbyP OTHERS PICTURE BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT ADVANCED RESET BACK···[RETURN] 31 30 30 30 30 12 • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. 3 2 HDMI1 [PC] nExample of operation (Adjusting CONTRAST in the PICTURE menu) 1. Press [MENU/ENTER] button to display the menu screen. PICTURE SETUP MONITOR PbyP OTHERS PICTURE BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT ADVANCED RESET OK···[ENTER] V: 60Hz END···[RETURN] 31 30 30 30 30 12 HDMI1 [PC] 1920x1080 V: 60Hz 4 1 Name of the menu 2 Input mode 3 An item being selected (highlighted) 4 Screen resolution of input signal, and other data. TIPS 1920x1080 2. Press [VOL+/ ]/[VOL-/ ] button to select PICTURE, and press [MENU/ENTER] button. 3. Press [VOL+/ CONTRAST. PICTURE SETUP MONITOR PbyP OTHERS PICTURE BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT ADVANCED RESET BACK···[RETURN] 31 30 30 30 30 12 ]/[VOL-/ ] button to select HDMI1 [PC] • Items that cannot be selected appear in gray. Function not supported by the current input signal) • The menu screen is on the left side of the screen in the landscape orientation, and at the bottom of the screen in the portrait orientation. 1920x1080 V: 60Hz 4. Press brightness adjustment button ( the setting. PICTURE SETUP MONITOR PbyP OTHERS PICTURE BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT ADVANCED RESET 31 40 30 30 30 12 / ) to adjust HDMI1 [PC] 1920x1080 V: 60Hz BACK···[RETURN] For items that have , press [MENU/ENTER] button and then configure the settings. 5. Press [INPUT/RETURN] button to close the menu screen. E 18 Menu Items Menu item details The menu will differ depending on the input mode. nPICTURE BRIGHT Adjusts the backlight brightness. CONTRAST Adjusts the difference between the bright and dark portions of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. Selecting + changes the color towards green, and selecting - changes it towards magenta. SHARPNESS Adjusts the sharpness of the image. Some settings and images may cause vertical lines to appear in the center of the screen. COLOR ADJUSTMENT COLOR MODE The color mode changes in the following order: STD (Standard) → VIVID → sRGB → STD. . . * sRGB applies to PC input only.  RGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color s conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to its original image. Selects the color temperature using PRESET.  sed for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively. U PRESET Selects the color temperature when the WHITE BALANCE is set to PRESET. The setting values are shown for reference. [. . . ] This monitor supports DDC2B. E 34 Specifications nDisplayPort input (DisplayPort 20 pin) terminal pins nPC/AV (HDMI TM HDMI input terminal pins Connector) No. 1 2 3 4 5 6 7 8 9 10 Gnd Function MainLane 3MainLane 3+ MainLane 2Gnd MainLane 2+ MainLane 1Gnd MainLane 1+ MainLane 0- No. 11 12 13 14 15 16 17 18 19 20 Gnd Function MainLane 0+ Gnd Gnd Aux+ Gnd AuxHot-plug detection Gnd 3. 3V No. 1 2 3 4 5 6 7 8 9 10 Function TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 shield TMDS data 0TMDS clock+ No. [. . . ]