User manual SHARP PN-L602B

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. 1 E IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. ONLY CAUTION: Use the supplied power cord as it is. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] CONTRAST Adjusts the brightness of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS (AV input) Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 22. ) AUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. MENU Select "ON" and then press . SETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. 768LINES (PC2/PC3) If a computer connected to the PC2/PC3 input terminal has a resolution of 1024 x 768, 1280 x 768 or 1360 x 768, make a selection according to the resolution. SELF ADJUST On a PC2/PC3 screen with a resolution of 800 x 600 or higher, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when the timing of input signals varies. "ADJUSTING" appears on the screen during the adjustment. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode when the PC screen is displayed. AUTO INPUT CHANGE Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, AUTO INPUT CHANGE automatically changes the selected mode to another mode where a video signal is present. When video signals exist in multiple input modes, the switching priority is as follows: PC1, PC2, PC3, AV1, AV2 and AV3. MOTION TIME 1 Specify a time period (operating interval) until SCREEN MOTION starts. MOTION TIME 2 Specify a time period during which SCREEN MOTION operates (time period during which the screen will move). MONITOR Select the installation direction of the monitor. LANDSCAPE . . . . . . . . . . . . Horizontal orientation PORTRAIT . . . . . . . . . . . . . . . Vertical orientation LANGUAGE Sets the display language for the menu screen. [. . . ] Use the bracket which applied UL1678 standard, and which can endure at least 3 times or more the weight of the monitor. Compatible signal timing (PC) VESA Screen resolution 640 x 480 Hsync 31. 5 kHz 37. 9 kHz 37. 5 kHz 35. 1 kHz 37. 9 kHz 48. 1 kHz 46. 9 kHz 31. 0 kHz 48. 4 kHz 56. 5 kHz 60. 0 kHz 67. 5 kHz 47. 8 kHz 60. 3 kHz 60. 0 kHz 64. 0 kHz 80. 0 kHz 47. 7 kHz 75. 0 kHz 44. 7 kHz 66. 3 kHz 31. 5 kHz 48. 3 kHz 53. 6 kHz 56. 6 kHz 61. 8 kHz 71. 8 kHz 71. 7 kHz 81. 1 kHz 68. 6 kHz Vsync 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 70 Hz 60 Hz 66 Hz 70 Hz 66 Hz 76. 2 Hz 67. 2 Hz 76 Hz 66 Hz Dot frequency Analog signal Digital signal Yes 25. 175 MHz Yes 31. 5 MHz Yes Yes 31. 5 MHz Yes Yes 36. 0 MHz Yes 40. 0 MHz Yes Yes 50. 0 MHz Yes Yes 49. 5 MHz Yes Yes 33. 75 MHz Yes Yes 65. 0 MHz Yes Yes 75. 0 MHz Yes Yes 78. 75 MHz Yes Yes 108. 0 MHz Yes Yes 79. 5 MHz Yes Yes 102. 25 MHz Yes Yes 108. 0 MHz Yes Yes 108. 0 MHz Yes Yes 135. 0 MHz Yes Yes 85. 5 MHz Yes Yes 162. 0 MHz Yes Yes 74. 4 MHz Yes Yes 148. 5 MHz Yes Yes 28. 3 MHz Yes Yes 64. 13 MHz Yes 70. 4 MHz Yes 74. 25 MHz Yes 94. 88 MHz Yes 108. 23 MHz Yes 117. 01 MHz Yes 134. 99 MHz Yes 135. 76 MHz Yes - 2-5/8 [66] 800 x 600 848 x 480 1024 x 768 1152 x 864 1280 x 768 1280 x 960 1280 x 1024 1360 x 768 1600 x 1200*1 1280 x 720 1920 x 1080 720 x 400 1024 x 768 Wide US TEXT Sun 1152 x 900 1280 x 1024 1600 x 1000 *1 Displays a reduced image. * All are compliant only with non-interlaced. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. * The frequency values for the Sun are reference values. A separate conversion adapter (commercially available) may be required for connecting the monitor to the Sun. [. . . ]