User manual SHARP PN-R703

[. . . ] PN-R703 PN-R603 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:  REDUCE THE RISK OF ELECTRIC TO SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] * The following combinations are available for display: DisplayPort - HDMI1 or HDMI2 DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - D-SUB[VIDEO] DVI-I - HDMI1 or HDMI2 DVI-I - D-SUB[COMPONENT] DVI-I - D-SUB[VIDEO] TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the INPUT SELECT options cannot be set. • When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. Setting procedure Set using MULTI in the MULTI/PIP menu. Set the number of monitors aligned in the horizontal direction in ENLARGE H. Set the number of monitors aligned in the vertical direction in ENLARGE V. Set the section of the separated image to be displayed on each monitor in ENLARGE-POS. 1) Press , 2) Press MENU press . TIPS ENTER , or to select position, then • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the AUTO INPUT CHANGE function is disabled. • When Enlarge is used, the HDMI AUTO VIEW function is disabled. nZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OTHERS menu to ON and then select ZOOM2 in the SIZE setting. This displays the area inside the black band. Laptop computer resolution 1280x800 1280x600 1024x600 Corresponding signal*1 1280x1024, 1280x960, 1400x1050*2 1280x720 1024x768 *1:  his setting is effective only when the screen resolution, T including the black band, is one of the resolutions listed above. *2: Use the automatic screen adjustment.  29 E Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (1) POWER Caution D-SUB[RGB] – –/– –/– – – – DAY OF THE WEEK – –– - –– (2) (3) ––– – – – – – – – – –– –– –– –– –– –– –– –– – – – – – – – –– –– –– –– –– –– –– - –– –– –– –– –– –– –– ––:–– ––:–– ––:–– ––:–– ––:–– ––:–– ––:–– ––:–– TIME (4) – –:– –:– – – – –– –– –– –– –– –– –– –– INPUT (5) –– –– –– –– –– –– –– –– BRIGHT (6) –– –– –– –– –– –– –– –– • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. [. . . ] 1 2 3 4 5 6 7 8 Function Red video signal input Green video signal input Blue video signal input N. C. GND GND for red video signal GND for blue video signal No. 9 10 11 12 13 14 +5V GND N. C. Function No. 1 2 3 4 5 N. C. Function Transmitted data Received data N. C. [. . . ]