User manual SHARP PN-S655

[. . . ] IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: · ThewirewhichiscolouredGREEN-AND-YELLOWmustbeconnectedtotheterminalintheplugwhichismarkedbythe letter E or by the safety earth or coloured green or green-and-yellow. Thelightningflashwitharrowheadsymbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may beofsufficientmagnitudetoconstituteariskof electric shock to persons. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. [. . . ] Aleakybatterymaycorrodetheequipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: · Leakedbatteryfluidthatgetsintoyoureyeoryour clothing may cause a skin irritation or damage your eye. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor. - Do not display a still picture for a long period, as this could cause a residual image. - Never rub or tap the monitor with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law. - This monitor and its accessories may be upgraded without advance notice. - Do not use the monitor where there is a lot of dust, where humidity is high, or where the monitor may come into contact withoilorsteam, asthiscouldleadtofire. - Ensure that the monitor does not come into contact with waterorotherfluids. Do not allow the monitor to receive strong shocks or to strongly vibrate. causing the monitor to fall or topple over may damage it. - Do not use the monitor near heating equipment or in places where there is likelihood of high temperature, as this may leadtogenerationofexcessiveheatandoutbreakoffire. - Do not damage the power cord nor place heavy objects on it, stretch it or over bend it. - Use only the power cord supplied with the monitor. - Insert the power plug directly into the AC outlet. addinganextensioncordmayleadtofireasaresultof overheating. - Do not remove or insert the power plug with wet hands. [. . . ] Turn off the power and turn it on after waiting at least 5 seconds, and then check the operation. WhentheAUTOINPUTCHANGEisONandnosignal is present in a selected input mode, the AUTO INPUT CHANGE automatically changes the selected mode to a mode where a video signal is present. The input mode may change in the following cases: -Whenacomputerisinstandbymode. Whentheinternaltemperatureofthemonitorrises excessively, the brightness of the backlight automatically decreases in order to prevent a further temperature rise. [. . . ]