User manual SHARP PN-V601A

[. . . ] S1 IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. €¢ The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] €¢ Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. €¢ This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). €¢ Be careful of high temperatures in the surrounding area. When installing the monitor inside a housing, or if the ambient temperature may be outside of the range of 32ºF (0ºC) to 104ºF (40ºC), install a fan or take other measures to keep the ambient temperature within the required range. €¢ Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. €¢ Adhere to the following when installing the monitor in its vertical orientation. Failing to adhere to the following may cause malfunctions. -  o install in horizontal orientation, rotate the monitor 90 T degrees to the right. - Set the MONITOR on the SETUP menu to PORTRAIT. ) -  e sure to secure the power cord (supplied) to the cable B clamp attachment below with the supplied cable clamp. Make sure that the power cord (supplied) does not supply power to the terminal when being secured and do not over bend the power cord (supplied). Power cord (Supplied) Cable clamp attachment Cable clamp • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. €¢ After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. €¢ Do not place the monitor on a device which generates heat. €¢ Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. [. . . ] To attach the handles with the handle spacers removed, secure the handles with the included handle screws (short). Affixing the Protection Covers Protection cover After installing the monitor, affix the protection covers (4 pieces) as necessary. Protection cover 11 E Turning Power On/Off Caution nDate/time setting • Turn on the monitor first before turning on the PC or playback device. €¢ If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. [. . . ]