User manual SHARP PN-V602

[. . . ] - This product comes with RICOH Bitmap Fonts produced and sold by RICOH COMPANY, LTD. - All other brand and product names are trademarks or registered trademarks of their respective holders. - Language of OSD menu used in this manual is English by way of example. - Illustrations in this manual may not exactly represent the actual product or display. [. . . ] select the resetting method, and then press ALL RESET1 . . . . Resets all the settings to the factory default settings. ALL RESET2 . . . . Returns all settings to the factory default settings except for the following items: LAN SETUP, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 10, and pages 32 to 35. ) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. 1. . . . . . . . . Disables all operations other than turning power on/off, FUNCTION, and REMOTE CONTROL MODE. 2. . . . . . . . . Only the FUNCTION and REMOTE CONTROL MODE operations are enabled. Disables all operations other than FUNCTION and REMOTE CONTROL MODE (not even power on/off). RS-232C (RS-232C/LAN when the PN-ZB02 (optional) is attached) Specifies whether to allow control via RS-232C or LAN (see pages 17 and 28). The FUNCTION and REMOTE CONTROL MODE screens cannot be hidden. LED Specifies whether to light the power LED. OFF cannot be selected when STANDBY MODE is LOW POWER. TEMPERATURE ALERT Selects the notification method for an abnormal temperature. Do not notify about an abnormal temperature. When an abnormal temperature is detected, the power LED flashes in red and green alternately and the screen displays a message: TEMPERATURE. From monitor to PC. 30 001 17 E Controlling the Monitor with a PC (RS-232C) nResponse code format O K When a command has been executed correctly Return code (0DH, 0AH) nCommunication interval A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of responding monitor · After OK or ERR is returned, you must send the following commands. To set a timeout for the command response, specify 10 seconds or longer. When connecting multiple monitors in a daisy chain, set the timeout to at least the product of the monitor's position from the computer multiplied by 10 seconds. Example) 3rd monitor from computer: 30 seconds or longer. · Provide an interval of 100 ms or more between the command response and the transmission of the next command. VOLM0020 OK Interval of 100 ms or more INPS0001 WAIT OK TIPS When a command has not been executed E R R Return code (0DH, 0AH) * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) E R R SPC 0 0 ID number 1 TIPS · "ERR" is returned when there is no relevant command or when the command cannot be used in the current state of the monitor. · If communication has not been established for reasons such as a bad connection between the PC and monitor, nothing is returned (not even ERR). · If no monitor has been assigned the designated ID number (e. g. if the command IDSL0002 is used, but no monitor with ID number: 2 is found), no response is returned. If execution of the command is taking some time W A I T Return code (0DH, 0AH) · When executing ALL RESET, set the timeout period to 30 seconds or longer. [. . . ] Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. E 38 7-7/8 [200] Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 Hsync 31. 5kHz 37. 9kHz 37. 5kHz 35. 1kHz 37. 9kHz 48. 1kHz 46. 9kHz 31. 0kHz 48. 4kHz 56. 5kHz 60. 0kHz 67. 5kHz 47. 8kHz 60. 3kHz 49. 7kHz 60. 0kHz 64. 0kHz 80. 0kHz 47. 7kHz 65. 3kHz 75. 0kHz 65. 3kHz 44. 7kHz 47. 7kHz 66. 3kHz 67. 5kHz 31. 5kHz 48. 3kHz 53. 6kHz 56. 6kHz 61. 8kHz 71. 8kHz 71. 7kHz 81. 1kHz 68. 6kHz Vsync 60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 75Hz 60Hz 60Hz 60Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 70Hz 60Hz 66Hz 70Hz 66Hz 76. 2Hz 67. 2Hz 76Hz 66Hz Dot frequency 25. 175MHz 31. 5MHz 31. 5MHz 36. 0MHz 40. 0MHz 50. 0MHz 49. 5MHz 33. 75MHz 65. 0MHz 75. 0MHz 78. 75MHz 108. 0MHz 79. 5MHz 102. 25MHz 83. 5MHz 108. 0MHz 108. 0MHz 135. 0MHz 85. 5MHz 121. 75MHz 162. 0MHz 146. 25MHz 74. 4MHz 85. 5MHz 148. 5MHz 148. 5MHz 28. 3MHz 64. 13MHz 70. 4MHz 74. 25MHz 94. 88MHz 108. 23MHz 117. 01MHz 134. 99MHz 135. 76MHz Digital DVI*2 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Analog (D-SUB/RGB*2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 800 × 600 848 × 480 1024 × 768 1152 × 864*1 1280 × 768 1280 × 800*1 1280 × 960*1 1280 × 1024*1 1360 × 768 1400 × 1050*1 1600 × 1200*1 1680 × 1050*1 1280 × 720 1366 × 768 1920 × 1080*1 720 × 400 1024 × 768 Wide US TEXT Sun 1152 × 900*1 1280 × 1024*1 1600 × 1000*1 *1 Displays a reduced image, except in Dot by Dot. [. . . ]