User manual SHARP PN-655RE

[. . . ] IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: · The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. ensure that your equipment is connected correctly. [. . . ] The display disappears when this button is pressed again or disappears automatically after approximately 15 seconds. Even when the screen size is changed, the display may remain the same depending on the input signal. An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. Use this size if ZOOM 1 cuts off the subtitles. Even when the screen size is changed, the display may remain the same depending on the input signal. An image with a 4:3 aspect ratio is stretched to fill the entire screen. An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. Use this size if ZOOM 1 cuts off the subtitles. Displays the entire image of the aspect ratio of 4:3 without changing the aspect ratio. * If "DotbyDot" is selected in the conditions below, the image quality cannot be changed by adjusting the value of "SHARPNESS" from the VIDEO ADJUSTMENT menu. When the input mode is COMPONENT and images of 480i or 480p are displayed Using this monitor's screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful. When "Enlarge" is set, the screen size is fixed to "WIDE" mode. When dual-screen display is selected, the screen size cannot be changed. When using the screen-size switching function of this monitor, the appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e. Please consider this point when selecting the screen size. When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator's intentions, set the screen size to "NORMAL". When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. Menus can be displayed on the screen to enable video and audio adjustment and the setting of various functions using the remote control unit. [. . . ] Internal temperature rises quickly if the vents on the monitor are blocked. Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Ask Sharp dealer about removing internal dust. Cracking sound The monitor sometimes makes a cracking sound. [. . . ]