User manual SHARP PZ-50MR2E

[. . . ] ·This Player is classified as a CLASS 1 LASER product. ·The CLASS 1 LASER PRODUCT label is located on the rear cover. ·This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. [. . . ] Program 1 Program 4 Select Title Name B Program 2 Program 5 Enter By Chapter Return Playlist Program 3 Program 6 EXIT D You can play back a recorded disc (DVD: VR format finalised disc only / BD: BDAV format disc only). · For a description of other playback functions, refer to "Playback Functions" on pages 35­37. 1 A B C Exit Functions A C Exit Functions 3 NOTE · "Finalise" refers to a recorder processing a recorded disc so that it will play in other DVD players/recorders as well as this player. Only finalised DVD discs will play back in this player. (This player does not have a function to finalise discs. ) · Some discs cannot be played back depending on the audio format. · BD-RE/-R discs recorded from a BD recorder comply with AACS copyright protection technology. As this player is not intended to be compliant with AACS, such discs cannot be played back. (AACS: Advanced Access Content System) 2 · If the Title List screen is not displayed, press TOP MENU/TITLE LIST. · When loading a BD disc with usage restrictions placed by a BD recorder, the password input screen appears. If you input a wrong password three times, the disc tray will open. Close the disc tray, and then input a correct password. Title Name Program 1 21/5 Fri 9:30 AM 110 Min. Program 1 1 Program 1 2 Program 2 3 Program 3 4 Program 4 5 Program 5 6 Program 6 Enter Sorting 21/5 15/6 3/7 18/9 20/9 25/9 Return Playlist Fri 110 Min. 1/All 8 Titles EXIT D Playback 1 Press a/b/c/d to select the desired title, then press ENTER to start playback. · If you want to select additional titles, switch pages by pressing f or g. · The Repeat function does not work. 32 Video/Picture/Music Playback Displaying Still Images (JPEG files) CD-R CD-RW DVD-R DVD-RW USB NOTE · A USB memory device can be used with either the USB1 or USB2 terminal. When two USB memory devices are connected to both terminals at the same time, in certain situations the USB1 terminal may give priority to Local Storage and JPEG files cannot be played back using this terminal. 5 Press ENTER to display the selected file. · The selected still image appears on the screen. This Player can display still images (JPEG files) recorded on CD-R/RW discs, DVD-R/RW discs and USB memory devices or via a home network. 1/77 · For details on the still images that you can display using this player, refer to page 11. · Still images are played one by one while during "Slide show", they are automatically replaced one after another. · When data in the USB memory device is played back, playback from the USB memory device will stop when OPEN/CLOSE on the remote control or the player is pressed or when a disc is inserted into the player. 2 3 Press a/b to select "Picture", then press d or ENTER. Press a/b to select "DVD/CD*", "USB Memory Device" or "Home Network", then press d or ENTER. media inserted. · If only a "DVD/CD" or a USB memory device is inserted, the "DVD/CD" or "USB Memory Device" selection screen does not appear. In such cases, after step 2, proceed to step 4. 6 To return to the HOME screen, press c, and then press HOME or EXIT. * Display name varies depending on the type of Operational buttons during still image display Buttons f/ g d/ e Description Go to the previous/next picture in the same directory. 4 Press a/b to select a folder or file. · When you select a folder, press ENTER to open it, and then press a/b to select a file in the folder. Folder 1 CD 1 Folder 1 2 Folder 2 3 Folder 3 4 Folder 4 5 Image 01. jpg 6 Image 02. jpg 1/All 14 files and folders Playback j C (Yellow) D (Blue) a Return to the selection screen. Rotate the picture by 90 degrees to the left. Rotate the picture by 90 degrees to the right. · Return to slide show playback when paused. Stop still image display/slide show playback. [. . . ] The license notices for these software components are shown below. OpenSSL License This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www. openssl. org) Original SSLeay License This product includes cryptographic software written by Eric Young (eay@cryptsoft. com). BSD License This product includes software developed by the University of California, Berkeley and its contributors. [. . . ]