User manual SHARP QT-222W

[. . . ] G Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc. ) which generates electrical noise. G Hold the AC power plug by the head when removing it from the AC socket as pulling the lead can damage internal wires. G When cleaning the heads, pinch roller, etc. , remove the AC power lead from the AC socket as the unit contains high voltages. Do not remove the outer cover, as this may result in electric shock. [. . . ] G Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. Caution: Do not use rechargeable batteries (nickel-cadmium battery, etc. ). Listening to the Radio STAND-BY 1 2 3 4 Set the FUNCTION switch to RADIO. Set the BAND SELECTOR switch to FM, MW, SW1 or SW2. Turn the TUNING control to tune in to the desired station. The FINE TUNING control functions only for SW1 and SW2 bands. Turn the VOLUME control to increase or decrease the volume. Aerial adjustment: FM MW SW1 and SW2 After use: Set the FUNCTION switch to STAND-BY. E-3 QT-222W(B)_E. pm 10 03. 10. 24, 11:55 AM QT-222W(B) 92L20101550040 Listening to a Cassette Tape STAND-BY 1 2 3 4 5 Set the FUNCTION switch to TAPE. Open the cassette compartment by pushing the STOP/EJECT I 7 button. Load a cassette into the cassette compartment with the side to be played facing you. Press the PLAY 1 button. I Cassette tape To advance the tape, press the STOP/ EJECT I 7 button, then press the F FWD 3 button. To rewind, press the STOP/EJECT I 7 button, then press the REWIND 2 button. To interrupt playback: Press the PAUSE 6 button during playback. Press the PAUSE 6 button again to resume playback. To stop playback: Press the STOP/EJECT I 7 button. Precautions: G Be sure not to press the PLAY 1 and REWIND 2 buttons simultaneously, or the tape will become damaged. G Before changing from one tape operation to another, press the STOP/EJECT I 7 button. G Do not press the PAUSE 6 button whilst the fast forward or rewind operations are in progress. The F FWD 3 or REWIND 2 button will not be released when the tape end is reached. [. . . ] G After long use, the deck's heads and capstan may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording by using a commercial tape head demagnetiser. Read the demagnetiser's instructions carefully before use. and a diluted soap solution, then wipe with a dry cloth. [. . . ]