User manual SHARP QT-27H

[. . . ] Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] REPEAT 1 REPEAT FOLDER Selected track number REPEAT FOLDER REPEAT FOLDER REPEAT ALL REPEAT ALL FOLDER 3 Press the MEMORY button to save the track number. MEMORY WMA WMA WMA 4 NORMAL FOLDER RANDOM RANDOM FOLDER WMA WMA Repeat steps 2 - 3 for other tracks and programmed number will automatic increase. "_ _ _" indicator will display on LCD after programmed up to 20 tracks. If you make a mistake, the programmed tracks can be cleared by pressing the button twice. Press the / button to start playback. 5 9 QT-27H Programmed play for CD or MP3/WMA disc with folder 1 For MP3/WMA CD with folder, total folder number will be display. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the button. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Notes: When open the CD compartment, the programme is automatically cancelled. After you change the function from CD to another, the programmed selections will be cleared. During programme operation, random play is not possible. Notes: This unit only supports "MPEG-1 Audio Layer-3" format. (Sampling Frequency is 32, 44. 1, 48kHz) "MPEG-2 Audio Layer-3", "MPEG-2. 5 Audio Layer-3" and MP1, MP2 format are not supported. Playback order for MP3 files may differ sometimes depending on the writing software used during file download. If the reception is weak, set it to FM (MONO). The sound becomes clearer. PAUSE STOP/EJECT F. FWD REWIND PLAY RECORD TAPE (STAND-BY) CD RADIO FUNCTION · AM · FM BAND Notes: FM stereo indicator will light on when reception is good. Power on indicator will light up when FUNCTION switch set to RADIO. Display will become blank in radio mode. Aerial adjustment: FM ST MONO FM 1 2 BEAT CANCEL ON AM / SH AR P After use: Set the FUNCTION switch to TAPE [STAND-BY]. Beat cancel switch: If a whistling noise occurs when recording from an FM or AM station, set the BEAT CANCEL switch to 1 or 2, whichever gives the best reception. 12 Radio QT-27H Listening to a cassette tape Cassette Tape Before playback: For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended. ) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 1 2 3 4 5 Set the FUNCTION switch to TAPE. Open the cassette compartment by pushing the STOP/ EJECT / button. Load a cassette into the cassette compartment with the side to be played facing up. To advance the tape, press the STOP/EJECT / button, then press the F. FWD button. [. . . ] Has condensation formed inside the unit? Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc. ). Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Tuner Symptom The radio makes unusual noises continuously. [. . . ]