User manual SHARP QT-CD180W

[. . . ] Q Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures. Q Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc. Q Hold the AC power plug by the head when removing it from the AC socket, as pulling the lead can damage internal wires. q When cleaning the heads , pinch roller , etc. [. . . ] To move to the beginning of the next track: During playback, press the CUE/UP 4 button. Notes: q To skip a number of tracks at one time, press the REVIEW/DOWN 5 or CUE/UP 4 button repeatedly until the desired track number is shown. Q To start playing a desired track, press the REVIEW/DOWN 5 or CUE/UP 4 button whilst in the stop mode to select the track number, and then press the PLAY/PAUSE 06 button. Q When "Cd" or track number is displayed, the power is connected. If you will not be using the CD player, set the FUNCTION switch to STAND-BY. q Do not open the CD compartment whilst the disc is rotating. Q If the disc is damaged, dirty, or loaded upside down, the total number of tracks will not appear. clean , replace , or reload the disc properly. Q Keep foreign objects out of the CD compartment. Q Subjecting the unit to shock or vibration may cause mistracking. Q Keep the CD compartment closed except when loading discs. q Playing certain compact discs at a high volume may cause mistracking. Q If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. To fast forward audibly (Cue): During playback, hold down the CUE/UP 4 button. Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. Q Do not write on either side of the disc, particularly the non-label side. Signals are read from the non-label side. Q Keep your discs away from direct sunlight, heat, and excessive moisture. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius. During FM stereo reception, it automatically switches to monaural when the signal is weak. [. . . ] Read the demagnetiser's instructions carefully before use. SHARP reserves the right to make design and specification changes for product improvement without prior notice. Power source AC110-127/220-240V, 50/60 Hz DC 9 V ["D" size (UM/SUM-1, R20 or HP-2) battery x 6] Power consumption 13 W Output power MPO: 8. A Laser pickup lens B Pinch roller C Capstan D Recording/Playback head E Erase head Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dry cloth. [. . . ]