User manual SHARP QT-CD20H

[. . . ] AND IRELAND The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] Time search feature is disabled on some discs. 19 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 QT-CD20H Useful operation (continued) " To change the angle You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles. " To play repeatedly (repeat play) You can play a chapter (track) or a title repeatedly by specifying it during playback. When " " is displayed in the upper right corner of the TV screen, press the ANGLE button repeatedly to select the desired angle number. Notes: 1/2 1 Whilst the disc is playing, press the 1/ALL REPEAT button. TV screen Unit display CHAPTER REPEAT ON The repeat play mode changes as follows on DVD: "CHAPTER REPEAT ON" "TITLE REPEAT ON" "REPEAT OFF" Repeats the chapter currently playing. Refer to the manual of the disc as the operation may vary depending on the disc. The angle number is not displayed if there is no other angle recorded. " " is displayed instead. DVD Operation " To zoom images (zoom) You can magnify images during playback. - Useful operation - 1 During playback, press the ZOOM button whilst holding down the SHIFT button. The repeat play mode changes as follows on SVCD/VCD/audio CD: ZOOM X 1. 5 "REP-ONE" "REP-ALL" Repeats the track currently playing. Normal playback. Each press cycles through the zoom settings as follows: ZOOM X 1. 5 ZOOM X 2 ZOOM X 3 ZOOM OFF "REPEAT OFF" 2 To shift the view and display the desired part of a zoomed image, press the , , or button repeatedly. 2 To return to the normal playback, press the 1/ALL REPEAT button repeatedly and select "REPEAT OFF". button. Otherwise, the disc Caution: After performing repeat play, be sure to press the STOP will play continuously. Notes: To return to normal view: !Whilst holding down the SHIFT button, press the ZOOM button repeatedly to select "ZOOM OFF". When you cancel the zoom function, you cannot shift the view. !On some discs, the repeat play function is disabled. During random play operation, repeat play is not possible. If no subtitles are recorded on the disc, " " is displayed. It may take time to switch the subtitle language to the selected one. Subtitles cannot be hidden on some discs. 22 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 QT-CD20H " To change the TV system You can select a TV type. " To change the display on TV screen You can display or hide the operation indicators on the TV screen. Whilst the disc is playing, press the DISPLAY button. (The display is changed at each press. ) 1 Whilst holding down the SHIFT button in the stop mode, press the NTSC/PAL button repeatedly to select a TV type. PAL MULTI. SYSTEM NTSC 2 DVD: Current title number Current chapter number TITLE 02/05 CHAPTER 001 / 008 00:30:21 SVCD/VCD/Audio CD: SINGLE ELAPSED 00:01:16 Indicator PAL MULTI. SYSTEM NTSC Setting Select this mode for the PAL TV. Select this mode for the multi-system TV. Select this mode for the NTSC TV. Total number of chapters Total number of titles Elapsed playback time for the current title TITLE REMAIN 00:45:00 Elapsed playback time for the current track 3 Remaining playback time for the current title Remaining playback time for the current track CHAPTER ELAPSED 00:01:23 Elapsed playback time for the current chapter CHAPTER REMAIN 00:03:03 TOTAL ELAPSED 00:12:40 - Various settings - SINGLE REMAIN 00:03:21 DVD Operation 4 5 Total elapsed playback time for the disc Remaining playback time for the current chapter OFF TOTAL REMAIN 00:48:54 00:05:21 6 MP3: CHAPTER ELAPSED Total remaining playback time for the disc Elapsed playback time for the current track OFF CHAPTER REMAIN 00:02:35 7 Remaining playback time for the current track Note: When P. B. C. is set to ON for SVCD or VCD, total playback time and total remaining playback time do not appear. OFF 8 23 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 QT-CD20H Video CD and Super Video CD playback The following playback functions are the same as DVD or CD operations. " Video CD with P. B. C. (playback control) 1 Press the PLAY/PAUSE / button. 1 2 Video CD and Super Video CD Operation - Video CD and Super Video CD playback - Page Playback . [. . . ] Power source AC 230 - 240 V, 50 Hz DC 12 V ["D" size (UM/SUM-1, R20 or HP-2) battery 8] DC 3 V ["AA" size (UM/SUM-3, R6 or HP-7) battery 2 for memory] 23 W RMS: 10 W (5 W + 5 W) (10 % T. H. D. , 1 kHz) 8 cm full-range speaker Width: 420 mm Height: 150 mm Depth: 260 mm 5. 2 kg PAL/NTSC colour 2 QT-CD20H 1 WRONG REGION Maintenance !Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). " Do not apply oil to the inside of the equipment as this may cause malfunctions. Power consumption Output power Speakers Dimensions - Error indicators and warnings / Maintenance / Specifications - 2 3 References Weight Signal system Supported disc types Video signal Audio signal DVD (region number 2 or ALL), SVCD, VCD, audio CD, CD-R, CD-RW, MP3 Horizontal resolution: 500 lines S/N ratio: 50 dB Frequency characteristics Linear PCM DVD: 20 Hz to 20 kHz (sampling rate: 48 kHz) 20 Hz to 20 kHz (sampling rate: 96 kHz) CD: 20 Hz to 20 kHz CD: 80 dB (1 kHz) Linear PCM DVD: 70 dB 4 ! [. . . ]