User manual SHARP QT-CD220H

[. . . ] If it does not, consult your dealer or service organisation. If your set is equipped with a voltage selector, adjust it so that it matches with the local mains. Connect the mains lead to the MAINS socket and the wall socket. TM The mains supply is now connected and ready for use. [. . . ] TM The CD player scans the contents of the CD and the total number of tracks is displayed. Press PLAY·PAUSE 2; to start playback. Adjust the sound using the VOLUME and DBB controls. To interrupt playback press PLAY·PAUSE 2;. To resume, press PLAY·PAUSE 2; again. TM The current track number flashes in the display 7. To switch off the set, adjust the source selector to TAPE/POWER OFF position (with the cassette keys released) DYN AMI Note: CD playback will also stop when: CB ASS BOO ­ the CD door is opened; ST ­ the source selector is in the TAPE/RADIO positions; ­ the CD has reached the end. POWER English ­ ­ ­ ­ ­ ­ PROGRAM PROGRAM DBB BASS DYNA MIC BOOS T VOL UME PL AY RE CO RD POWER DBB BASS DYNA MIC BOOS T VOL UME DBB BASS DYNA MIC BOOS T VOLU ME POWER PAUS E STO P-OP EN SE AR CH SEARCH SHUFFLE CD MO DE STOP PLAY·P AUSE POWER DBB BASS DYNA MIC BOOS T VOLU ME SELECTING A DIFFERENT TRACK During playback, you can use the SEARCH keys to select a particular track. Press SEARCH § once for the next track, or press repeatedly until the desired track number appears in the display. Press SEARCH once to return to the beginning of a current track. Press SEARCH more than once for a previous track. If you have selected a track number in the stop or pause position, you will need to press PLAY·PAUSE 2; to start playback. Press STOP·OPEN 9 / to open the cassette holder and insert a recorded cassette. Adjust the sound using the VOLUME and DBB controls. By pressing 5 or 6, fast winding of the tape is possible in both directions. To stop fast winding, press STOP·OPEN 9 / 8. To stop the tape, press STOP·OPEN 9 / TM The keys are automatically released at the end of the tape, except if PAUSE ; has been activated. With the source selector in TAPE/POWER OFF position, the set is switched off when all the cassette keys are released. POWER English DBB BASS DYNA MIC BOOS T VOL UME OLU ME PAUS E STO P-OP EN SE AR CH PL AY RE CO RD SHUFFLE POWER DBB BASS DYNA MIC BOOS T VOL UME PAUS E STO P-OP EN SE AR CH DYN AMI CB AS GENERAL INFORMATION ON CASSETTE RECORDING · Recording is permissible insofar as copyright or other rights of third parties are not infringed. · This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken. · The recording level is set automatically. Altering the VOLUME and DBB controls will not affect the recording in progress. · At the very beginning and end of the tape, no recording will take place during the 7 seconds, when the leader tape passes the recorder heads. · To protect a tape from accidental erasure have the tape in front of you and break out the left tab. [. . . ] · Always shut the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth. Adequate ventilation with a minimum gap of 15 cms between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up. · The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. [. . . ]