User manual SHARP QTCD180 OPERATION MANUAL

[. . . ] Contents PORTABLE CD STEREO SYSTEM MODEL QT-CD180H OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Page Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] q No naked flame sources, such as lighted candles, should be placed on the apparatus. q Attention should be drawn to the environmental aspects of battery disposal. q The apparatus is designed for use in moderate climate. Warnings: q The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. q CD players use a laser pickup which can damage the eyes if viewed directly. Do not look at the pickup, and do not touch the pickup directly. Controls and Indicators 12345678 9 10 11 12 13 14 15 16 17 18 MODEL NO. QT-CD180H PORTABLE CD STEREO SYSTEM 230 - 240 V ç 50 Hz 10 W 9 V å, (UM/SUM-1, R20 or HP-2) × 6 FREQUENCY RANGE FM 87. 5 - 108 MHz AM 526. 5 - 1606. 5 kHz SERIAL NO. SHARP CORPORATION < The bottom of the unit > 01. (CD) Pause Indicator Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 3 Operation with AC power Operation with batteries AC 230-240 V, 50 Hz 2 3 1 To AC INPUT 5 6 To an AC socket Connect the AC power lead to the AC power input socket, then connect the AC power lead plug to an AC socket. Notes: q If the unit will not be used for a long period of time, remove the AC power lead from the AC socket. q Connection of the AC power lead to the unit disconnects the batteries. q Never use a power lead other than the one supplied. It may cause an electric shock or fire. 4 1 Disconnect the AC power lead, and remove the battery compartment cover. (UM/SUM-1, R20, HP-2 or similar) into size batteries the battery q Insert the batteries according to the direction indicated on the rear panel. q When inserting or removing the batteries 3 and 6 , push them toward the ë battery terminals. q Installing the batteries incorrectly may cause the unit to malfunction. 3 Replace the battery compartment cover. Battery replacement: Replace the batteries when they become weak and/or recording or playback is impaired. This may occur even though radio broadcasts are audible. Remove the battery compartment cover, and insert your finger in the hole on the bottom of the unit to remove batteries. Notes: q Replace all old batteries with new ones at the same time. q Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. [. . . ] Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. q After long use, the deck's heads and capstan may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording by using a commercial tape head demagnetiser. Read the demagnetiser's instructions carefully before use. A 3 Press the RECORD q button. Headphones B CD E A Laser pickup lens B Pinch roller C Capstan D Recording/Playback head E Erase head s Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dry cloth. [. . . ]