User manual SHARP QT-CH88H

[. . . ] Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. [. . . ] If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter LED with a soft cloth before operating the unit. Warning: CD players use a laser pickup which can damage the eyes if viewed directly. Do not look at the pickup, and do not touch the pickup directly. Tab for side B (2) Tab for side A (1) 2 QT-CH88H(SUK) TINSE0026SJZZ <P=003> NAMES OF CONTROLS AND INDICATORS 1 2 3 4 5 678 9 13 10 11 12 16 17 18 14 15 19 20 21 22 23 24 31 29 32 30 33 25 26 27 28 11. 23. (TAPE) Record Button (TAPE) Play Button (TAPE) Rewind Button (TAPE) Fast Forward Button (TAPE) Stop/Eject Button (TAPE) Pause Button Cassette Compartment CD Compartment CD Eject Button (CD) Pause Button (TUNER) Band Selector Button Preset Memory Button (CD) Stop Button (TUNER) Tuning Down Button (CD) Play/Repeat Button (TUNER) Tuning Up Button (CD) Track Up/Cue Button (TUNER) Preset Up Button (CD) Track Down/Review Button (TUNER) Preset Down Button Stand-by, On/Function Switch Extra Bass Button Volume Control (CD) Play Indicator (CD) Repeat Indicator (CD) Pause Indicator Memory Indicator (TUNER) FM Stereo Mode Indicator 24. 3 (TUNER) FM Stereo Indicator Battery Compartment FM Telescopic Rod Aerial Headphone Socket AC Power Input Socket (CD) Track Down/Review Button (TUNER) Preset Down Button (CD) Pause Button (TUNER) Band Selector Button (CD) Play/Repeat Button (TUNER) Tuning Up Button (CD) Track Up/Cue Button (TUNER) Preset Up Button (CD) Stop Button (TUNER) Tuning Down Button 3 QT-CH88H(SUK) TINSE0026SJZZ <P=004> POWER SOURCE s AC power q AC 230 - 240 V, 50 Hz q To AC INPUT Connect the AC power lead to the AC power input socket, then connect the AC power lead plug to an AC socket. Notes: q If the unit will not be used for a long period of time, remove the AC power lead from the AC socket. q Connection of the AC power lead to the unit disconnects the batteries. q Never use a power lead other than the one supplied. Use of a power lead other than the one supplied may cause an electric shock or fire. Precautions for battery use: q Insert the batteries according to the direction indicated on the rear panel. q Replace all old batteries with new ones at the same time. q If the disc is damaged, dirty, or loaded upside down, "Er" or "no diSC" will appear in the display. Clean, replace, or reload the disc properly. q Keep foreign objects out of the CD compartment. q Subjecting the unit to shock or vibration may cause mistracking. q Keep the CD compartment closed except when loading discs. q Playing certain compact discs at a high volume may cause mistracking. q The temperature range for playing compact discs is recommended to be 5°C (41°F) - 35°C (95°F). q If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. 5 Press the PLAY/REPEAT (0 playback from track 1. R) button to start s APSS (Auto Program Search System) APSS automatically locates the beginning of any track. To listen again to the track being played: Press the 5 button for less than 0. 5 seconds during playback. To move to the beginning of the next track: Press the 4 button for less than 0. 5 seconds during playback. Notes: q To skip a number of tracks at one time, press the 4 (2/4 or 5 (3/5 button repeatedly ) ) until the desired track number is shown. [. . . ] q Tune in to the station to be recorded. Load a blank cassette into the cassette compartment. Press the PAUSE button again. s Erasing a recorded tape 1 2 3 Set the function switch to TAPE. Load the tape to be erased into the cassette compartment. [. . . ]