User manual SHARP R-22AM

[. . . ] It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. (c) Do not operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the: (1) door (bent), (2) hinges and latches (broken or loosened), (3) door seals and sealing surfaces. [. . . ] Air Filter Cycle Air Filter Cycle can be changed from the factory setting of 100 hours to 001-999 hours * Suppose you want to set the cycle to 250 hours. Multiplication Factor for Double/Triple Quantity The multiplication factors of the double and triple quantities for memory cooking are preset to 1. * Suppose you want to know the multiplication factor for double quantity with memory 1, and change it to 2. 1 Press the CUSTOM HELP pad twice within 2 seconds and enter 8, 2. 1 Press the CUSTOM HELP pad twice within 2 seconds and press the DOUBLE/TRIPLE QUANTITY pad. In case of single magnetron failure, the oven can be used until servicing by changing settings to allow operation under single magnetron only. However, check food carefully as additional cooking time will be needed when operating with a single magnetron. CH91 : Your oven does not work when one magnetron fails = Factory setting CH92 : Your oven works even if one magnetron fails. To set magnetron failure options Press the CUSTOM HELP pad twice within 2 seconds then enter the numbers 9, 1 to stop operation when one magnetron fails 9, 2 to allow operation of one magnetron only Press the START pad to save settings and the STOP/ CLEAR pad to exit from the Custom Help Function. Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factor for Double/Triple Quantity. The multiplication factors can be set from 0. * Suppose you want to set the Total Cooking Time of Express Defrost to 30 minutes with memory 2 using Single Digit Input. Follow steps 3-6 on the left side of page EN-21 to complete. * Suppose you want to set the Total Cooking Time of Express Defrost to 30 minutes with memory 12 using Repeat Digit Input. Follow steps 3-6 on the left side of page EN-21 to complete. Each stage has 100~60% power level or 50~10% power level. Maximum Cooking Time Calculation Total Cooking Time of + 50~10% Power Level 2 * Suppose you want to cook 5 minutes at 100% for 1st stage, 15 minutes at 80% for 2nd stage, 40 minutes at 30% for 3rd stage and 20 minutes at 10% for 4th stage. 0% power level : Maximum 99 minutes and 99 seconds can be input at one stage (Max. Cooking operations can now be demonstrated with no power in the oven. To cancel, press the SELECT TIME pad, then 0 and the STOP/ CLEAR pad or unplug your oven. To set cooking during the Demonstration Mode, press the SELECT TIME pad and enter time and press the START pad. Monitor function is used to check the power level during cooking. [. . . ] The more food placed in the oven cavity at one time, the longer the heating time. This is because there is a constant level of energy coming out of the magnetron tube during the heating process. If there are several food items in the oven, they will each absorb some of the energy thus making the total heating time longer. the time required for heating is not directly proportional to the increased amount of food. [. . . ]