User manual SHARP R-28ST DEESPTFRITNLSEDKNOFI

[. . . ] GB This operation manual contains important information which you should read carefully before using your microwave oven. Important: There may be a serious risk to health if this operation manual is not followed or if the oven is modified so that it operates with the door open. Support du plateau tournant ACCESSOIRES : Assurez-vous que les accessoires suivants sont bien fournis avec le four : (14) Plateau tournant (15) Support du plateau tournant (16) Entraînement Placez l'entraînement dans l'arbre du moteur du plateau tournant puis placez le support du plateau tournant au centre de la sole de four, afin qu'il puisse tourner librement sur l'entraînement. Plateau tournant et support du plateau tournant Retirez le plateau tournant et le support du plateau tournant du four. [. . . ] Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23. Press the CLOCK SET/ DELAY START button, the minute figure will flash. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59. Press the CLOCK SET/ DELAY START button to start the clock. The icon “:” of the digital time will be flashing on the display and the clock indicator will disappear. NOTES: • If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will show "0:00". € To check the time of day during a cooking process, press CLOCK SET/ DELAY START button and the LED will display the time of day for 2-3 seconds. This does not affect the cooking process. € In the process of clock setting, if the STOP button is pressed, the oven will go back to the former setting. € If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power is reinstated. If this occurs during cooking, the programme will be erased. MICROWAVE POWER LEVELS Your oven has 5 power levels and to set the power follow the instruction below: To set the power level • Press the MICROWAVE button once, P 100 will be displayed and at the same time the microwave indicator and high heat indicator will light up on the display. € Rotate the ENTRY dial to change the power level until the oven indicates the desired level. € Press the MICROWAVE button to confirm the setting, enter the cooking time and then press the START/+1min button ( ) to start the oven. € To check the power level during cooking, press the ), the current power MICROWAVE button ( level will be displayed for 4 seconds. The oven will continue to count down although the display will show the power level. LED Display Microwave Power HIGH = 100 % MEDIUM HIGH = 80 % MEDIUM = 50 % MEDIUM LOW = 30 % LOW = 10 % Generally the following recommendations apply: P100 - (HIGH output = 800 W) used for fast cooking or reheating e. P80 - (MEDIUM HIGH output =640 W ) used for longer cooking of dense foods such as roast joints, meat loaf and plated meals, also for sensitive dishes such as sponge cakes. At this reduced setting, the food will cook evenly without over cooking at the sides. P50 - (MEDIUM output = 400 W) for dense foods which require a long cooking time when cooked conventionally, e. Beef casserole, it is advisable to use this power setting to ensure the meat will be tender. [. . . ] Oven exterior The outside of your oven can be cleaned easily with mild soap and water. Make sure the soap is wiped off with a moist cloth, and dry the exterior with a soft towel. Control panel Open the door before cleaning to de-activate the control panel. Care should be taken in cleaning the control panel. [. . . ]