User manual SHARP R-CD1200

[. . . ] To aid in reporting this commercial microwave oven in case of loss or theft, please record below the model number and serial number located on the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER/NUMÉRO DE MODÈLE/NÚMERO DE MODELO SERIAL NUMBER/NUMÉRO DE SÉRIE/NÚMERO DE SERIE DATE OF PURCHASE/DATE D'ACHAT/FECHA DE COMPRA Dealer/Vendeur/Distribuidor Telephone/Téléphone/Teléfono Servicer/Réparateur/ Servicio Telephone/Téléphone/Teléfono TO PHONE/POUR TÉLÉPHONER/POR TELÉFONO: SERVICE and PARTS/SERVICE et PIÈCES/SERVICIO y PARTES (for your nearest Sharp Authorized Servicer and Parts Distributor) (Pour votre réparateur et distributeur de pièces autorisé par Sharp) (para su Personal de servicio de reparación y distribuidor de partes Sharp autorizado más cercano) ADDITIONAL CUSTOMER INFORMATION/AUTRE INFORMATION POUR LE CLIENT/ INFORMACIÓN ADICIONAL PARA EL CLIENTE 1-877-427-7696 TO WRITE/POUR ÉCRIRE/POR ESCRITO: Sharp Electronics Corporation Customer Assistance Center 1300 Naperville Drive Romeoville, IL 60446-1091 Please provide the following information when you write or call: model number, serial number, date of purchase, your complete mailing address (including zip code), your daytime telephone number (including area code) and description of the problem. For Customer Assistance Front cover Contents 1 Precautions to Avoid Possible Exposure to Excessive Microwave Energy 1 Limited Warranty 2 Important Safety Instructions 3 Service Call Check 4 Grounding Instructions 5 Installation 6 Part Names 7 Before Operation 8 Memory Operation 8 Memory Cooking 8 Cooking double/triple quantity with memory 9 Express Defrost with Memory 10 Manual Operations 10 Time Cooking 10 Single Stage Cooking 10 Multi Stage Cooking Express Defrost Express Defrost Chart Program & Customize Custom Help Counter Check To Reset the Counter to "0" Saving Memories Other Convenient Features Demonstration Mode Monitor Care and Cleaning Cooking Guide Utensils Guidelines for microwave heating Timing guide Heating and cooking time guide Reminders Specifications 10 11 11 12 12 14 15 18 23 23 23 23 25 25 26 27 28 30 30 (a) Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. [. . . ] CH91 : Your oven does not work when one magnetron fails = Factory setting CH92 : Your oven works even if one magnetron fails. To set magnetron failure options Press the CUSTOM HELP pad twice within 2 seconds then enter the numbers 9, 1 to stop operation when one magnetron fails 9, 2 to allow operation of one magnetron only Press the START pad to save settings and the STOP/ CLEAR pad to exit from the Custom Help Function. Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factor for Double/Triple Quantity. The multiplication factors can be set from 0. When you want to know the multiplication factor for triple quantity, press the DOUBLE/TRIPLE QUANTITY twice at step 1 after pressing the CUSTOM HELP pad twice. Multiplication Factors for Double/Triple Quantity can be checked or changed before pressing the STOP/ CLEAR pad to exit for Custom Help Function. * Suppose you want to change the Express Defrost set factory settings to the following: Defrosting Time STAGE 1 STAGE 2 STAGE 3 Pause Timing T x 0. 1 Press the CUSTOM HELP pad twice within 2 seconds and press the EXPRESS DEFROST pad. T : INPUT TIME (TOTAL COOKING TIME) * : The numbers in the parentheses are factory settings and can be adjusted. Express Defrost is preset to pause during the sequence when 50% of total defrosting time has passed to check food. After ending of each stage Pause Timing ) 4 Press the SELECT POWER pad and enter desired power level for PL1 at Stage 1. * Memory 0 - 9 are programmed as factory settings. see the table of Programmed Memories on page EN-8. * Memories must be programmed before memory cooking can be used. * Suppose you want to set 1 minute at 70% with memory 2. 7 Press the SELECT POWER pad and enter desired power level for PL2 at Stage 2. ) 9 Press the SELECT POWER pad and enter desired power level for PL3 at Stage 3. You can enter minus numbers for B1 and B2 at steps 3 and 6. In that case, press the SELECT TIME pad twice at step 3 or 6 ( is displayed. ) and enter desired time for or B1 and B2 at Stage 1 and 2. Press the SELECT TIME pad again to enter positive numbers. * Suppose you want to set 4 minutes at 60% with memory 1 and 2 minutes at 30% with memory 2. [. . . ] The heating time should be increased by about 80% for each additional like food item. Plated Meals 1 small Plated Meal 1 large Plated Meal Primary Cooking 4 slices Bacon 1 pound Bacon (precook to reheat) 2 Scrambled Eggs 12 Scrambled Eggs (precook to reheat) 1 ear Corn on the Cob 1 medium Potato 2 medium Potatoes 40 oz. Cover with lid for first half of cooking time. uncover for second half of cooking time. [. . . ]