Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP RK-93S27. We hope that this SHARP RK-93S27 user guide will be useful to you.
Lastmanuals help download the user guide SHARP RK-93S27.
Manual abstract: user guide SHARP RK-93S27INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Also remove the turntable tray and turntable support from the oven cavity. * Because these kits are metal, due caution should be used in handling and installation to avoid the possibility of injury. * Two wooden supports must be provided, nominal 2"x 2"x 155/8"(actual 19/16"x19/16"). [. . . ] Remove the existing screw (#1) at upper right rear of the oven and secure DUCT (C) with the screw (#1) just removed from the oven. Secure DUCT (B) with SCREW (A) through the duct and into the original screw hole in the oven. See Sketch 2.
2
2
(b) Position DUCT (A)-1 on the top of the oven inserting edge of DUCT (BC) into hold lip of DUCT (A)-1. Then tighten two SCREWS (A), securing DUCT (A)-1 to DUCT (BC). See Sketch 3.
3
(c) Position DUCT (A)-2 on top of the oven and insert it into the hold lip of DUCT (A)-1. Secure DUCT (A)-2 to DUCT (A)-1 using two SCREWS (A) provided. See Sketch 4.
4
(d) Position DUCT (A)-3 on top of the oven and insert it into DUCT (A)-2. Secure DUCT (A)-3 using three SCREWS (A) provided. Remove the backing paper from the CUSHION(A). Attach CUSHION (A) along the flange of DUCT (A)-3. See Sketch 5.
CUSHION (A)
5
3
STEP 3: CORD BOX
(a) Plug the oven electrical cord into the CORD BOX RECEPTACLE and roll the remaining part of the cord into the CORD BOX as shown in Sketch 6-(a). (b) Remove screw #2 from lower left rear of the oven. Insert right flange of the CORD BOX into hold lip of the oven. Using the screw #2 just removed from the oven, secure the CORD BOX to the oven. See Sketch 6.
6
STEP 4: INSTALLATION
(a) Place the oven with the right side on a flat surface. Remove the backing paper from the CUSHION (B). [. . . ] Then loosely secure the upper SASH (T) to the wall (or cabinet) through upper hole in SASH (S) using one of SCREW (B) provided. (b) Place the lower one of SASH (T) against the wall (or cabinet) and up against the bottom of the oven. Secure the lower SASH (T) to the wall (or cabinet) through the lower hole in SASH (S) using a SCREW (B) provided. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP RK-93S27
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP RK-93S27 will begin.
